HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15663 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
EXL1162T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1112A
制造商:
LEXAN™
high flow opaque injection molding (IM) grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow opaque injection molding (IM) grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1112T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1132T
制造商:
LEXAN™
UV stabilized transparent injection molding (IM) grade with extra release properties, good low temperature ductility, high flow characteristics, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized transparent injection molding (IM) grade with extra release properties, good low temperature ductility, high flow characteristics, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1162T
制造商:
LEXAN™
transparent injection molding (IM) grade with extra release properties
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
transparent injection molding (IM) grade with extra release properties
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1112T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1132
制造商:
LEXAN™
high flow, UV stabilized injection molding grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, UV stabilized injection molding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1132
制造商:
LEXAN™
high flow, UV stabilized injection molding grade, good low temperature ductility, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, UV stabilized injection molding grade, good low temperature ductility, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1132T
制造商:
LEXAN™
UV stabilized transparent injection molding (IM) grade with extra release properties
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized transparent injection molding (IM) grade with extra release properties
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1132T
制造商:
LEXAN™
UV stabilized transparent injection molding grade with extra release properties
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized transparent injection molding grade with extra release properties
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1132T
制造商:
LEXAN™
UV stabilized, transparent, high flow characteristics, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, transparent, high flow characteristics, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1132
制造商:
LEXAN™
high flow, UV stabilized injection molding grade, good low temperature ductility, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, UV stabilized injection molding grade, good low temperature ductility, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1132T
制造商:
LEXAN™
UV stabilized, transparent, high flow characteristics, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, transparent, high flow characteristics, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1112T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1112
制造商:
LEXAN™
{'Processing': 'Injection Molding', 'Applications': 'Automotive', 'Regional Availability': 'North America'}
Physical Properties
Density
1.183
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing': 'Injection Molding', 'Applications': 'Automotive', 'Regional Availability': 'North America'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1112
制造商:
LEXAN™
{'Processing': 'Injection Molding', 'Applications': 'Automotive', 'Regional Availability': 'North America'}
Physical Properties
Density
1.183
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing': 'Injection Molding', 'Applications': 'Automotive', 'Regional Availability': 'North America'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1112
制造商:
LEXAN™
High flow opaque injection molding grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow opaque injection molding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1112
制造商:
LEXAN™
{'Processing': 'Injection Molding', 'Applications': 'Automotive', 'Regional Availability': 'North America'}
Physical Properties
Density
1.183
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing': 'Injection Molding', 'Applications': 'Automotive', 'Regional Availability': 'North America'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DMX1435
制造商:
LEXAN™
{'UV_stabilized': 'Yes', 'standard_flow': 'Yes', 'improved_scratch_resistance': 'Yes', 'improved_dielectric_performance': 'Yes', 'transparency': 'Yes', 'colorable': 'Yes'}
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'UV_stabilized': 'Yes', 'standard_flow': 'Yes', 'improved_scratch_resistance': 'Yes', 'improved_dielectric_performance': 'Yes', 'transparency': 'Yes', 'colorable': 'Yes'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DMX2415
制造商:
LEXAN™
Scratch Resistant, Copolymer
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 15663 materials | Scroll down for more