HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15672 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
EXL1414H
Manufacturer:
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414T
Manufacturer:
LEXAN™
extreme low temperature ductility, medium flow characteristics, excellent processability, shorter IM cycle times compared to standard PC, general purpose product, transparent and opaque colors
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
extreme low temperature ductility, medium flow characteristics, excellent processability, shorter IM cycle times compared to standard PC, general purpose product, transparent and opaque colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXL1414T
Manufacturer:
transparent, extreme low temperature ductility, medium flow characteristics, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
transparent, extreme low temperature ductility, medium flow characteristics, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414T
Manufacturer:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1433T
Manufacturer:
LEXAN™
UV stabilized transparent injection molding grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized transparent injection molding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414H
Manufacturer:
LEXAN™
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414H - Asia
Manufacturer:
LEXAN™
Opaque
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414
Manufacturer:
LEXAN™
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXL1414H
Manufacturer:
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1330
Manufacturer:
LEXAN™
{'Processing/Physical Characteristics': 'Melt volume-flow rate, MVR: 9 cm³/10min, Melt Flow Index, MFI: 10 g/10min', 'Mechanical properties': 'Tensile Modulus: 2100 MPa, Yield stress: 55 MPa, Yield strain: 5 %, Stress at break: 56 MPa, Strain at break: 50 %, Flexural modulus: 2100 MPa, Charpy impact strength, +23°C, 3mm: kJ/m², Charpy notched impact strength, +23°C, 3mm: 75 kJ/m², Charpy notched impact strength, -30°C, 3mm: 60 kJ/m², Izod impact strength, +23°C: kJ/m², Izod notched impact strength, +23°C, 3mm: 70 kJ/m², Izod notched impact strength, -30°C, 3mm: 55 kJ/m², Ball indentation hardness: 90 MPa', 'Thermal properties': 'Vicat softening temperature, B: 143 °C, Vicat softening temperature, 120°C/h 50N: 145 °C, Burning behav. at thickness h: HB class, Glow Wire Flammability Index (GWFI): 960 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (1): 875 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (3): 875 °C', 'Other properties': 'Water absorption: 0.35 %, Sim. to ISO 62, Humidity absorption: 0.15 %, Sim. to ISO 62, Density: 1180 kg/m³, ISO 1183, Density: 1180 kg/m³, ASTM D 792'}
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing/Physical Characteristics': 'Melt volume-flow rate, MVR: 9 cm³/10min, Melt Flow Index, MFI: 10 g/10min', 'Mechanical properties': 'Tensile Modulus: 2100 MPa, Yield stress: 55 MPa, Yield strain: 5 %, Stress at break: 56 MPa, Strain at break: 50 %, Flexural modulus: 2100 MPa, Charpy impact strength, +23°C, 3mm: kJ/m², Charpy notched impact strength, +23°C, 3mm: 75 kJ/m², Charpy notched impact strength, -30°C, 3mm: 60 kJ/m², Izod impact strength, +23°C: kJ/m², Izod notched impact strength, +23°C, 3mm: 70 kJ/m², Izod notched impact strength, -30°C, 3mm: 55 kJ/m², Ball indentation hardness: 90 MPa', 'Thermal properties': 'Vicat softening temperature, B: 143 °C, Vicat softening temperature, 120°C/h 50N: 145 °C, Burning behav. at thickness h: HB class, Glow Wire Flammability Index (GWFI): 960 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (1): 875 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (3): 875 °C', 'Other properties': 'Water absorption: 0.35 %, Sim. to ISO 62, Humidity absorption: 0.15 %, Sim. to ISO 62, Density: 1180 kg/m³, ISO 1183, Density: 1180 kg/m³, ASTM D 792'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1330
Manufacturer:
LEXAN™
{'UV stabilized opaque injection molding (IM) and sheet extrusion grade': 'UV stabilized opaque injection molding (IM) and sheet extrusion grade', 'extreme low temperature (-60 C) ductility': 'extreme low temperature (-60 C) ductility', 'medium flow characteristics': 'medium flow characteristics', 'excellent processability': 'excellent processability', 'shorter IM cycle times compared to standard PC': 'shorter IM cycle times compared to standard PC', 'available in a wide range of opaque colors': 'available in a wide range of opaque colors'}
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'UV stabilized opaque injection molding (IM) and sheet extrusion grade': 'UV stabilized opaque injection molding (IM) and sheet extrusion grade', 'extreme low temperature (-60 C) ductility': 'extreme low temperature (-60 C) ductility', 'medium flow characteristics': 'medium flow characteristics', 'excellent processability': 'excellent processability', 'shorter IM cycle times compared to standard PC': 'shorter IM cycle times compared to standard PC', 'available in a wide range of opaque colors': 'available in a wide range of opaque colors'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1414
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1330
Manufacturer:
LEXAN™
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1413T
Manufacturer:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1413T
Manufacturer:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1330
Manufacturer:
LEXAN™
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1413T
Manufacturer:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1413T - Americas
Manufacturer:
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Total 15672 materials | Scroll down for more