HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
EXTEM™ Resin XH2315
Manufacturer:
Excellent mechanical, electrical and dimensional properties, very good chemical resistance, inherently flame retardant, RoHS compliant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical, electrical and dimensional properties, very good chemical resistance, inherently flame retardant, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®UHT 40G HCM
Manufacturer:
High temperature resistance, graphite filled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, Processing by hot compression molding
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High temperature resistance, graphite filled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, Processing by hot compression molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AURUM® PL450C
Manufacturer:
PI
Injection Molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®NT1 15G HCM
Manufacturer:
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®UHT 05P DF
Manufacturer:
Evonik Operations GmbH
Creep Resistance, Thermal Stability, Tribologic Grade
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Thermal Stability, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXTEM™ Resin XH2315
Manufacturer:
Excellent mechanical, electrical and dimensional properties, very good chemical resistance, inherently flame retardant, RoHS compliant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical, electrical and dimensional properties, very good chemical resistance, inherently flame retardant, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®NT1 40G HCM
Manufacturer:
High strength, excellent shape stability, very good impact resistance, high heat deflection temperature, very good creep resistance, machinable with standard tools, low wear and friction behavior
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High strength, excellent shape stability, very good impact resistance, high heat deflection temperature, very good creep resistance, machinable with standard tools, low wear and friction behavior
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®NT2 15G HCM
Manufacturer:
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®NT1 05P DF
Manufacturer:
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour, Processing by Direct forming
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour, Processing by Direct forming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®UHT 15G HCM
Manufacturer:
High temperature resistance, graphite filled
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High temperature resistance, graphite filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®NT1 15G 05P DF
Manufacturer:
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour, Processing by Direct forming
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour, Processing by Direct forming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®UHT 15G 10P DF
Manufacturer:
High temperature resistance, excellent thermal-oxidative stability, high mechanical strength, good creep resistance, excellent tribological properties, high wear resistance, easy machinability
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High temperature resistance, excellent thermal-oxidative stability, high mechanical strength, good creep resistance, excellent tribological properties, high wear resistance, easy machinability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®NT1 15G 05P DF
Manufacturer:
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour, Processing by Direct forming
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour, Processing by Direct forming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PGA
Manufacturer:
Barrier Properties, Blending Resin
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Barrier Properties, Blending Resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DUREZ 22257 PF
Manufacturer:
Barrier Properties
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Barrier Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Teflon™ PFA 345
Manufacturer:
Injection Molding, Pipe/Tube Extrusion, Wire/Cable Extrusion, Creep Resistance, Good Drawdown, Low Smoke, Melt Strength, Other Extrusion, Transfer Molding, Compression Molding, Thermal Stability, Tribologic Grade, General Chemical Resistance, Environmental Stress Crack Resistance, U.V. stabilized or stable to weather, Heat stabilized or stable to Regional Availability heat
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Wire/Cable Extrusion, Creep Resistance, Good Drawdown, Low Smoke, Melt Strength, Other Extrusion, Transfer Molding, Compression Molding, Thermal Stability, Tribologic Grade, General Chemical Resistance, Environmental Stress Crack Resistance, U.V. stabilized or stable to weather, Heat stabilized or stable to Regional Availability heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PFA 8015HS
Manufacturer:
INOFLOON™
Pipe/Tube Extrusion, Profile Extrusion, Wire/Cable Extrusion, Transfer Molding, Compression Molding
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pipe/Tube Extrusion, Profile Extrusion, Wire/Cable Extrusion, Transfer Molding, Compression Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hyflon® PFA F1520
Manufacturer:
Flame retardant
Physical Properties
Density
2.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
937
Manufacturer:
Decal® 937 PF-X
Not specified
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
T385J PF-(W+MX)
Manufacturer:
Injection Molding, Transfer Molding, Electrical and Electronical, General Purpose
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Transfer Molding, Electrical and Electronical, General Purpose
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more