Looking for a reliable supplier or an alternative grade? Tell us what you need

PFA

Teflon™ PFA 345

Manufacturer:Not available in English

Injection Molding, Pipe/Tube Extrusion, Wire/Cable Extrusion, Creep Resistance, Good Drawdown, Low Smoke, Melt Strength, Other Extrusion, Transfer Molding, Compression Molding, Thermal Stability, Tribologic Grade, General Chemical Resistance, Environmental Str

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density2.15g/cm³
Melt flow rate5.0g/10min
Tensile strength27.0MPa
Elongation at break300.0%
Flexural modulus551.0MPa
Flame ratingV-0—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.

Storage
Confirm packaging, temperature and humidity, shelf life, and handling after opening.
Drying
Confirm whether drying is required, plus temperature, time, dew point and target moisture.
Equipment setup
Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
Applications
Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.