Looking for a reliable supplier or an alternative grade? Tell us what you need

EXTEM™ Resin XH2315

Manufacturer:Not available in English

Excellent mechanical, electrical and dimensional properties, very good chemical resistance, inherently flame retardant, RoHS compliant

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.52g/cm³
Melt flow rate4.0g/10min
Tensile strength147.0MPa
Tensile modulus10500.0MPa
Elongation at break2.0%
Flexural modulus9000.0MPa
HDT 1.8MPa257.0°C
HDT 0.45MPa254.0°C
Vicat softening point267.0°C
Flame ratingUL94 V0 at 0.75 mm, V0,5VA at 1.0 mm and 1.5-1.65 mm—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage
Review the source for packaging, storage and opened-package instructions.
Drying
Candidate injection-molding recommendations: temperature 175 °C; time 4 - 6 h; processing moisture ≤0.02 %. Verify the source, grade and conditions.
Equipment setup
Candidate injection-molding recommendations: melt temperature 380 - 405 °C; mold temperature 160 - 200 °C. Verify the source, grade and conditions.
Applications
Candidate application areas in the source: electrical and electronics. Verify the source, exact use and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

  • Drying temperature:page 1
  • Drying time:page 2
  • Processing moisture:page 2
  • Melt temperature:page 2
  • Mold temperature:page 2
  • Application areas:page 2