HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
sPS® QT-22MN/000 HI
Manufacturer:
impact modified, based on metallocen catalysis technology high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, based on metallocen catalysis technology high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek sPS® QT-40GF/000 FR
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek sPS® QT-30GF/000
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek sPS® QT-25GF/000 FR
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek sPS® QT-15GF-15GB/000
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek sPS® QT-10GF-10MN/000
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PS-SY-GF10_Edgetek sPS® QT-10GF000 FR
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PS-SY-GF10_Edgetek sPS® QT-10GF000
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek sPS® QT-22GF/000 FR
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PS-SY-GF10
Manufacturer:
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high temperature thermoplast, high stiffness, good dimensional stability, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EDISTIR® RK 5512G PS-I FR
Manufacturer:
Versalis S.p.A
polybromobiphenylether (PBBE) free, high impact polystyrene with good mechanical and thermal properties
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
polybromobiphenylether (PBBE) free, high impact polystyrene with good mechanical and thermal properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P 477E PS-I
Manufacturer:
Easy processing of styrenics, superior impact strength, excellent environmental stress cracking resistance
Physical Properties
Density
0.88
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy processing of styrenics, superior impact strength, excellent environmental stress cracking resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SR 550 PS-I
Manufacturer:
EDISTIR®
good elasticity at low temperatures
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good elasticity at low temperatures
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RCL 600 PS-I
Manufacturer:
EDISTIR®
very high gloss
Physical Properties
Density
0.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very high gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EDISTIR® R 850E PS-I
Manufacturer:
Thermoplastics ISO 2897-PS-I,G,093-03-10-18
Physical Properties
Density
0.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermoplastics ISO 2897-PS-I,G,093-03-10-18
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RC 600 PS-I
Manufacturer:
EDISTIR®
veryhigh gloss
Physical Properties
Density
0.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
veryhigh gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
807H (PS-HI)
Manufacturer:
Flame retardant, High impact or impact modified, U.V. Europe stabilized or stable to weather
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified, U.V. Europe stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SUPREME SH 2157 E (PS-HI)
Manufacturer:
Supreme Petrochem Ltd
Injection Molding, Sheet Extrusion, Other Extrusion Food contact, Food approval FDA 21 CFR, RoHS compliant
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Sheet Extrusion, Other Extrusion Food contact, Food approval FDA 21 CFR, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4220 (PS-HI)
Manufacturer:
{'Processing': 'Injection Molding', 'Applications': 'Electrical and Electronical', 'Special_Characteristics': 'High impact or impact modified South and Central America', 'Certifications': 'Food contact, Food approval FDA 21 CFR'}
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing': 'Injection Molding', 'Applications': 'Electrical and Electronical', 'Special_Characteristics': 'High impact or impact modified South and Central America', 'Certifications': 'Food contact, Food approval FDA 21 CFR'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MI770 (PS-HI)
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more