HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15663 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
Copolymer EXL1414H - Asia
制造商:
LEXAN™
Opaque
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1414
制造商:
LEXAN™
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1414H
制造商:
LEXAN™ 共聚物
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque PC-Siloxan copolymer with excellent processability. Medium flow, extreme low temperature ductile. Enhanced hydrolytic stability. Only available in black color.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1414
制造商:
None
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1330
制造商:
LEXAN™
{'Processing/Physical Characteristics': 'Melt volume-flow rate, MVR: 9 cm³/10min, Melt Flow Index, MFI: 10 g/10min', 'Mechanical properties': 'Tensile Modulus: 2100 MPa, Yield stress: 55 MPa, Yield strain: 5 %, Stress at break: 56 MPa, Strain at break: 50 %, Flexural modulus: 2100 MPa, Charpy impact strength, +23°C, 3mm: kJ/m², Charpy notched impact strength, +23°C, 3mm: 75 kJ/m², Charpy notched impact strength, -30°C, 3mm: 60 kJ/m², Izod impact strength, +23°C: kJ/m², Izod notched impact strength, +23°C, 3mm: 70 kJ/m², Izod notched impact strength, -30°C, 3mm: 55 kJ/m², Ball indentation hardness: 90 MPa', 'Thermal properties': 'Vicat softening temperature, B: 143 °C, Vicat softening temperature, 120°C/h 50N: 145 °C, Burning behav. at thickness h: HB class, Glow Wire Flammability Index (GWFI): 960 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (1): 875 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (3): 875 °C', 'Other properties': 'Water absorption: 0.35 %, Sim. to ISO 62, Humidity absorption: 0.15 %, Sim. to ISO 62, Density: 1180 kg/m³, ISO 1183, Density: 1180 kg/m³, ASTM D 792'}
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing/Physical Characteristics': 'Melt volume-flow rate, MVR: 9 cm³/10min, Melt Flow Index, MFI: 10 g/10min', 'Mechanical properties': 'Tensile Modulus: 2100 MPa, Yield stress: 55 MPa, Yield strain: 5 %, Stress at break: 56 MPa, Strain at break: 50 %, Flexural modulus: 2100 MPa, Charpy impact strength, +23°C, 3mm: kJ/m², Charpy notched impact strength, +23°C, 3mm: 75 kJ/m², Charpy notched impact strength, -30°C, 3mm: 60 kJ/m², Izod impact strength, +23°C: kJ/m², Izod notched impact strength, +23°C, 3mm: 70 kJ/m², Izod notched impact strength, -30°C, 3mm: 55 kJ/m², Ball indentation hardness: 90 MPa', 'Thermal properties': 'Vicat softening temperature, B: 143 °C, Vicat softening temperature, 120°C/h 50N: 145 °C, Burning behav. at thickness h: HB class, Glow Wire Flammability Index (GWFI): 960 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (1): 875 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (3): 875 °C', 'Other properties': 'Water absorption: 0.35 %, Sim. to ISO 62, Humidity absorption: 0.15 %, Sim. to ISO 62, Density: 1180 kg/m³, ISO 1183, Density: 1180 kg/m³, ASTM D 792'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1330
制造商:
LEXAN™
{'UV stabilized opaque injection molding (IM) and sheet extrusion grade': 'UV stabilized opaque injection molding (IM) and sheet extrusion grade', 'extreme low temperature (-60 C) ductility': 'extreme low temperature (-60 C) ductility', 'medium flow characteristics': 'medium flow characteristics', 'excellent processability': 'excellent processability', 'shorter IM cycle times compared to standard PC': 'shorter IM cycle times compared to standard PC', 'available in a wide range of opaque colors': 'available in a wide range of opaque colors'}
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'UV stabilized opaque injection molding (IM) and sheet extrusion grade': 'UV stabilized opaque injection molding (IM) and sheet extrusion grade', 'extreme low temperature (-60 C) ductility': 'extreme low temperature (-60 C) ductility', 'medium flow characteristics': 'medium flow characteristics', 'excellent processability': 'excellent processability', 'shorter IM cycle times compared to standard PC': 'shorter IM cycle times compared to standard PC', 'available in a wide range of opaque colors': 'available in a wide range of opaque colors'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1414
制造商:
None
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1330
制造商:
LEXAN™
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1413T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1413T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1330
制造商:
LEXAN™
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized opaque injection molding (IM) and sheet extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1413T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1413T - Americas
制造商:
None
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1330
制造商:
LEXAN™
UV stabilized, opaque, injection molding and sheet extrusion grade, extreme low temperature ductility
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, opaque, injection molding and sheet extrusion grade, extreme low temperature ductility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1330
制造商:
LEXAN™
UV stabilized, opaque, injection molding and sheet extrusion grade, extreme low temperature ductility
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, opaque, injection molding and sheet extrusion grade, extreme low temperature ductility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1182T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1182T
制造商:
LEXAN™
UV stabilized, enhanced release, transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, enhanced release, transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1182T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Copolymer EXL1182T
制造商:
LEXAN™
UV stabilized, enhanced release, transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, enhanced release, transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EXL1162T
制造商:
LEXAN™
Transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Total 15663 materials | Scroll down for more