HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
Elastollan® R 2000
制造商:
None
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 1001
制造商:
巴斯夫聚氨酯有限公司
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 3000
制造商:
None
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 1001
制造商:
None
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 3000
制造商:
巴斯夫聚氨酯有限公司
良好的冲击强度，高刚度结合良好的伸长率，低热膨胀系数相当于金属（铝），低模具收缩率，易于涂装
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
良好的冲击强度，高刚度结合良好的伸长率，低热膨胀系数相当于金属（铝），低模具收缩率，易于涂装
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 1000
制造商:
None
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 6000
制造商:
巴斯夫聚氨酯有限公司
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 3001
制造商:
巴斯夫聚氨酯有限公司
良好的冲击强度，高刚度结合良好的应变，低热膨胀系数，低模具收缩率，易于涂装
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
良好的冲击强度，高刚度结合良好的应变，低热膨胀系数，低模具收缩率，易于涂装
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan R 1000
制造商:
巴斯夫
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan A C 85 A
制造商:
巴斯夫
良好的颜色牢度，易流动，表面结构细节再现，耐水解和低雾化值
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
良好的颜色牢度，易流动，表面结构细节再现，耐水解和低雾化值
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® R 6000
制造商:
巴斯夫聚氨酯有限公司
非常好的冲击强度，高刚度与良好的应变，低热膨胀系数，与金属（铝）相当，低模具收缩率，易于涂装
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
非常好的冲击强度，高刚度与良好的应变，低热膨胀系数，与金属（铝）相当，低模具收缩率，易于涂装
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan L 765 D
制造商:
None
high transparent
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® LP 9277
制造商:
巴斯夫
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Desmopan 3864D
制造商:
科思创德国公司
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
3864D
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Desmopan 3868D
制造商:
科思创德国公司
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® L 785 A
制造商:
None
high transparent
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Desmopan 3868D
制造商:
科思创德国公司
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan A C 85 A HPM
制造商:
None
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Texin® 570D
制造商:
科思创德国有限公司
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more
