玻璃纤维增强型热塑性聚氨酯弹性体 (TPU)
Elastollan® R 3000
Manufacturer：巴斯夫聚氨酯有限公司
良好的冲击强度，高刚度结合良好的伸长率，低热膨胀系数相当于金属（铝），低模具收缩率，易于涂装
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.38 | g/cm³ |
| Tensile strength | 80.0 | MPa |
| Tensile modulus | 2800.0 | MPa |
| Elongation at break | 10.0 | % |
| Notched impact strength | 22.0 | kJ/m² |
| HDT 1.8MPa | 132.0 | °C |
| HDT 0.45MPa | 175.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
