HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
F29 HT TF (PLA+PSAC)
Manufacturer:
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F27 (PLA+PSAC)
Manufacturer:
Biobased content 75 % - Moisture Content 1 % - Processing Recommendation Injection Molding Pre-drying - Temperature 50 °C - Melt temperature 170 - 180 °C - Characteristic Processing Regional Availability Injection Molding Europe, South and Central America - Certifications Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Compostable ISO 13432 (Certificate)
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biobased content 75 % - Moisture Content 1 % - Processing Recommendation Injection Molding Pre-drying - Temperature 50 °C - Melt temperature 170 - 180 °C - Characteristic Processing Regional Availability Injection Molding Europe, South and Central America - Certifications Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Compostable ISO 13432 (Certificate)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F29 HT 10 (PLA+PSAC)
Manufacturer:
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F28 HT (PLA+PSAC)
Manufacturer:
Inzea
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F29 HT 30 (PLA+PSAC)
Manufacturer:
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate) Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F25 (PLA+PSAC)
Manufacturer:
Inzea
Biobased content 75 % - Moisture Content 1 % - Processing Recommendation Injection Molding Pre-drying - Temperature 50 °C - Melt temperature 170 - 180 °C
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biobased content 75 % - Moisture Content 1 % - Processing Recommendation Injection Molding Pre-drying - Temperature 50 °C - Melt temperature 170 - 180 °C
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F18C (PLA+PSAC)
Manufacturer:
Inzea
Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate), Transparent
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Special Characteristics Compostable ISO 13432 (Certificate), Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F18P (PLA+PSAC)
Manufacturer:
Renewable content 40% Paper Like
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Renewable content 40% Paper Like
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F18P (PLA+PSAC)
Manufacturer:
Renewable content 40% Paper Like
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Renewable content 40% Paper Like
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F13C (PLA+PSAC)
Manufacturer:
Contains renewable resources, Biodegradable, Compostable
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
F10F UV (PLA+PSAC)
Manufacturer:
Inzea
Biobased content, Moisture Content, Film Properties, Processing, Certifications, Special Characteristics, Regional Availability
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biobased content, Moisture Content, Film Properties, Processing, Certifications, Special Characteristics, Regional Availability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PLA+PC_Ecopond AFR-97
Manufacturer:
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific, South and Central America, heat Near East/Africa
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific, South and Central America, heat Near East/Africa
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2099 X 127618 R (PLA+PC)
Manufacturer:
Contains renewable resources Special Characteristics Regional Availability Flame retardant
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources Special Characteristics Regional Availability Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HC 8910-0002 Natural PK
Manufacturer:
Injection Molding, Food contact, Food approval FDA 21 CFR, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Food contact, Food approval FDA 21 CFR, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESPEL® TP-8556
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESPEL® TP-8541
Manufacturer:
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESPEL® TP-8169
Manufacturer:
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESPEL® TP-8549
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®NT2
Manufacturer:
Excellent performance at high temperatures, High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent performance at high temperatures, High strength and excellent shape stability, Very good impact resistance, High heat deflection temperature, Very good creep resistance even at elevated temperatures, Machinable with standard tools, Low wear and friction behaviour
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P84®UHT
Manufacturer:
High temperature resistance, unfilled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, processing by hot compression molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High temperature resistance, unfilled, excellent thermal-oxidative stability, best dimensional stability, low water absorption, very good chemical resistance, excellent tribological properties, high wear resistance, processing by hot compression molding
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more