Looking for a reliable supplier or an alternative grade? Tell us what you need

PLA+PSAC

F27 (PLA+PSAC)

Manufacturer:Not available in English

Biobased content 75 % - Moisture Content 1 % - Processing Recommendation Injection Molding Pre-drying - Temperature 50 °C - Melt temperature 170 - 180 °C - Characteristic Processing Regional Availability Injection Molding Europe, South and Central America - Ce

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Tensile strength27.5MPa
Tensile modulus2000.0MPa
Elongation at break20.0%
Flexural modulus1900.0MPa
Notched impact strength5.0kJ/m²
HDT 1.8MPa60.0°C

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.

Storage
Confirm packaging, temperature and humidity, shelf life, and handling after opening.
Drying
Confirm whether drying is required, plus temperature, time, dew point and target moisture.
Equipment setup
Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
Applications
Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.