HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
1105-8278/OR PEEK-GF
Manufacturer:
Flame retardant, High impact or impact modified
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1105/GF/20/EM NC
Manufacturer:
Flame retardant, High impact or impact modified
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1105-7107
Manufacturer:
Low Warpage
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LARPEEK 50 G/30 PEEK-GF
Manufacturer:
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
10 G/60
Manufacturer:
LARPEEK
Low Smoke
Physical Properties
Density
1.82
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Smoke
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LARPEEK 10 G/30 PEEK-GF
Manufacturer:
{'chemical_resistance': 'General Chemical Resistance', 'injection_molding': 'Injection Molding', 'features': 'Low Smoke', 'regional_availability': 'Europe'}
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'chemical_resistance': 'General Chemical Resistance', 'injection_molding': 'Injection Molding', 'features': 'Low Smoke', 'regional_availability': 'Europe'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
10 G/15
Manufacturer:
LARPEEK
Low Smoke
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Smoke
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF008EX1
Manufacturer:
High Modulus and Strength, Easy Molding and Low Warpage
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus and Strength, Easy Molding and Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Vampeek A 5010 PEEK-GF50
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LF008EX1
Manufacturer:
LNP™ THERMOCOMP™
High Modulus and Strength, Easy Molding and Low Warpage
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus and Strength, Easy Molding and Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2207 LF PEEK-GF40
Manufacturer:
No Characteristics
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2299 X 108578 B
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2211 HF PEEK-GF60
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.84
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMEC K 3350R30 PEEK-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Vampeek A 3010 PEEK-GF30
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2205 HF SE PEEK-GF30
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2299 X 108578 A
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound LF006EX1
Manufacturer:
Low warpage, Easy Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warpage, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound LF006EX1
Manufacturer:
Low warpage, Easy Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warpage, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2205 HF Z
Manufacturer:
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more