HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ULTEM™ Resin DU319
Manufacturer:
Transparent
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DU242
Manufacturer:
ULTEM™
Enhanced low temperature impact, high flow
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced low temperature impact, high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1110F
Manufacturer:
Enhanced flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1110F
Manufacturer:
ULTEM™
Enhanced flow, ECO Conforming, US FDA and EU Food Contact compliant, NSF 51 listing, UL Yellow Card Link E121562-101048269
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow, ECO Conforming, US FDA and EU Food Contact compliant, NSF 51 listing, UL Yellow Card Link E121562-101048269
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010UCL
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010P200
Manufacturer:
excellent mechanical, electrical and dimension properties up to high temperatures, very good chemical resistance, RoHS Compliant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent mechanical, electrical and dimension properties up to high temperatures, very good chemical resistance, RoHS Compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1010F
Manufacturer:
high glass transition temperature (Tg) of 217°C, improved flow and global food compliance (FDA, CN, EC), low staining, microwave transparent and cold to the touch solutions, very good chemical resistance, inherently flame retardant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high glass transition temperature (Tg) of 217°C, improved flow and global food compliance (FDA, CN, EC), low staining, microwave transparent and cold to the touch solutions, very good chemical resistance, inherently flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1000R
Manufacturer:
ULTEM™
unreinforced amorphous polyetherimide (PEI) resin, high glass transition temperature (Tg) of 217°C, excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, RoHS compliant, available in opaque colors
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide (PEI) resin, high glass transition temperature (Tg) of 217°C, excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, RoHS compliant, available in opaque colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010M
Manufacturer:
High glass transition temperature, Improved flow, Reduced internal mold release, Excellent mechanical, electrical and dimensional properties, Very good chemical resistance, RoHS compliant, Available in opaque colors
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High glass transition temperature, Improved flow, Reduced internal mold release, Excellent mechanical, electrical and dimensional properties, Very good chemical resistance, RoHS compliant, Available in opaque colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010AR
Manufacturer:
high glass transition temperature, improved flow, internal mold release, excellent mechanical, electrical and dimensional properties, very good chemical resistance, RoHS compliant, available in opaque and transparent colors
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high glass transition temperature, improved flow, internal mold release, excellent mechanical, electrical and dimensional properties, very good chemical resistance, RoHS compliant, available in opaque and transparent colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1000F3SP
Manufacturer:
ULTEM™
transparent amber colored once processed
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
transparent amber colored once processed
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1000F3SP
Manufacturer:
unreinforced amorphous polyetherimide (PEI)
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide (PEI)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2199 X 130019 A
Manufacturer:
Injection Molding
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2100 PEI
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound EX02598C
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EX11402R
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EX00548C
Manufacturer:
Wear Resistant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound EX01407C
Manufacturer:
LNP™ STAT-KON™
LNP Clean Compounding Technology, Electrically Conductive
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
LNP Clean Compounding Technology, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound EX01407C
Manufacturer:
LNP™ STAT-KON™
LNP Clean Compounding Technology, Electrically Conductive
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
LNP Clean Compounding Technology, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EX00548C
Manufacturer:
LNP LUBRICOMP
Wear Resistant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more