HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
K6020GF30 PEKK-GF30
Manufacturer:
Arylmax®
Heat stabilized
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ST™ G45 PEKEKK
Manufacturer:
Ductile
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Ductile
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3905 PEKEKK-GF
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KARILLON 7A 440/337 PEK-(GF+GS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KARILLON 7A K30H PEK-GS
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
246/0451 PEK-CF
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KARILLON 7A FV30H PEK-GF
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VICTREX® HT™ 22GL30 PEK-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2201 A PEK-GF15
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7A FV15H
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VICTREX® ST™ P45 PEKEKK
Manufacturer:
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1220FE (PEK+PTFE)
Manufacturer:
Injection Molding Tribologic Grade
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1230FC (PEK+PTFE)-(CF+Z)
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1215FC (PEK+PTFE)-(CD+Z)
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HILUB 7A 252 (PEK+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G-PAEK™ 1215TFP (PEK+PTFE)
Manufacturer:
Flame retardant, Heat stabilized or stable to heat Acid Resistance, Alkali Resistance, General Chemical Resistance
Physical Properties
Density
1.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat Acid Resistance, Alkali Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
640/352 (PEK+PTFE)-GF
Manufacturer:
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PW1000
Manufacturer:
ULTEM™
unreinforced amorphous polyetherimide, high glass transition temperature (Tg) of 217°C, potable water certifications, food contact compliance, excellent mechanical and dimensional properties, very good hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide, high glass transition temperature (Tg) of 217°C, potable water certifications, food contact compliance, excellent mechanical and dimensional properties, very good hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU1100
Manufacturer:
ECO Conforming, biocompatible (ISO 10993 or USP Class VI), food contact compliant, Steam, Gamma, EtO, and E-beam sterilizable
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming, biocompatible (ISO 10993 or USP Class VI), food contact compliant, Steam, Gamma, EtO, and E-beam sterilizable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HU1010
Manufacturer:
ULTEM™
Excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, biocompatible, food compliance, steam-, peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, biocompatible, food compliance, steam-, peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more