HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
HOSTAFORM® C 13021 LS
Manufacturer:
Easy flowing Injection molding type for precision molded parts and thin-walled molded parts with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. With UV Additives Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances.
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy flowing Injection molding type for precision molded parts and thin-walled molded parts with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. With UV Additives Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RA500CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RA100CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RA300CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RA511CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
511CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
500CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
500CPE BK602
Manufacturer:
Injection Molding Low Emission, Thermal Stability, Homopolymer
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Thermal Stability, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
111P NC010
Manufacturer:
Creep Resistance, Fatigue Resistance, Low Warpage, Thermal Delivery form Stability, Weldable, Homopolymer Pellets, Natural Color
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Fatigue Resistance, Low Warpage, Thermal Delivery form Stability, Weldable, Homopolymer Pellets, Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
300CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
100CPE NC010
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
100PE NC010A
Manufacturer:
Injection Molding, Other Extrusion Creep Resistance, Fatigue Resistance, Homopolymer
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion Creep Resistance, Fatigue Resistance, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PRYME® Acetal AC100-9
Manufacturer:
Pellets, Natural Color, Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets, Natural Color, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
100CPE BK602
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bergaform C-900
Manufacturer:
very good flow properties, for thin wall parts
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good flow properties, for thin wall parts
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bergaform C-310
Manufacturer:
good flow properies, for thin wall parts
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good flow properies, for thin wall parts
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POM 23I10000
Manufacturer:
Regional Availability Europe
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability Europe
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HOSTAFORM® C 9021 GV1/20
Manufacturer:
Celanese
High resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound KF004 - Europe
Manufacturer:
LNP™
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HOSTAFORM® C 9021 GV1/10
Manufacturer:
high resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more