HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Softell TKG 317N C12507
Manufacturer:
High impact or impact modified, Acoustical Barrier Properties, Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Acoustical Barrier Properties, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Softell TKG 317N C11306
Manufacturer:
Injection Molding Acoustical Barrier Properties, Scratch Resistant, Copolymer
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Acoustical Barrier Properties, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G25 NTLA010 PH398
Manufacturer:
Petrotene
Injection Molding Homopolymer
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G24 T8 NTLA010 PH345
Manufacturer:
Petrotene
Injection Molding Homopolymer
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
natural_SA
Manufacturer:
Pellets, Natural Color
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets, Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G20 BRC0001 PH321
Manufacturer:
Petrotene
Homopolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G20 PRTA010 PH301
Manufacturer:
Petrotene
Injection Molding, Other Extrusion
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G20 NTLA010 PH304
Manufacturer:
Petrotene
Injection Molding Homopolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-B B 2020/550 GF20
Manufacturer:
ALTECH
Special Features chemically coupled
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Features chemically coupled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G15 NTLA010 PH307
Manufacturer:
Petrotene
Injection Molding, Other Extrusion
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF13_Softell TKG 442N E1 C12897
Manufacturer:
Acoustical Barrier Properties, Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acoustical Barrier Properties, Low Warpage, Scratch Resistant, Soft Feel, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G10 BRC085 PH405 MSP
Manufacturer:
Petrotene
Injection Molding, Other Extrusion
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP GPP-210
Manufacturer:
Special Characteristics
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4PROP 9D12410 H
Manufacturer:
Special Characteristics
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G20 T10 PRTA011 PH393 MSP
Manufacturer:
Petrotene
Injection Molding Solvent Resistance, Grease Resistance, Oil Resistance
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Solvent Resistance, Grease Resistance, Oil Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GF+GB40_LOXILENE PP GF25GB15 08037
Manufacturer:
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GB40
Manufacturer:
Special Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-GB40
Manufacturer:
Special Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM HM PP 3030 14029
Manufacturer:
antibacterial acc. to ISO 22196:2011,permanent antibacterial,anti-microbial,contain no nanosilver,heat stabilised
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
antibacterial acc. to ISO 22196:2011,permanent antibacterial,anti-microbial,contain no nanosilver,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 30 N
Manufacturer:
Special Features heat ageing stabilisation
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Features heat ageing stabilisation
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more