HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
FRIANYL® XT4 GF30 V0I
Manufacturer:
Celanese
Specifically designed for electrical and electronic applications that require high thermal, peak and continuous resistance together with compliance with the most stringent safety requirements, this compound is also easy to process with excellent aesthetic results. Suitable for components that need to withstand the reflow soldering process (SMT).
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Specifically designed for electrical and electronic applications that require high thermal, peak and continuous resistance together with compliance with the most stringent safety requirements, this compound is also easy to process with excellent aesthetic results. Suitable for components that need to withstand the reflow soldering process (SMT).
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound UX08319
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Dielectric Properties
Physical Properties
Density
2.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Dielectric Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMEC N 4314R15T1H
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-Z65
Manufacturer:
Acoustical Barrier Properties
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acoustical Barrier Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-Z65
Manufacturer:
Acoustical Barrier Properties
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acoustical Barrier Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-X_ALCOM HTC 3001 WT1056-10LD
Manufacturer:
special filler, light scattering, high light diffusion
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
special filler, light scattering, high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PF-PEI02
Manufacturer:
PolyFibra
Strongly reinforced
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Strongly reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PF-PEF05
Manufacturer:
Injection Molding
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PF-PEF04
Manufacturer:
PolyFibra
No Characteristics
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PF-PEF01
Manufacturer:
No Characteristics
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PF-PEF02
Manufacturer:
Injection Molding
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-W50
Manufacturer:
Acoustical Barrier Properties
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acoustical Barrier Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-W40
Manufacturer:
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-W40
Manufacturer:
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-W45
Manufacturer:
Medium-Low degree of fluidity; good overall balance of mechanical and thermal properties, high impact and mechanical stress resistance
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium-Low degree of fluidity; good overall balance of mechanical and thermal properties, high impact and mechanical stress resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-W35
Manufacturer:
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-W35
Manufacturer:
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-W40
Manufacturer:
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XW1302
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe, Asia Pacific weather
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe, Asia Pacific weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hostacom CR 1171 G1 G74010
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more