HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
EFN4230
Manufacturer:
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN9003G
Manufacturer:
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CRX1005
Manufacturer:
NORYL™
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN9003G
Manufacturer:
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CRX1005
Manufacturer:
NORYL™
Injection Molding, General Chemical Resistance, Hydrolytically Stable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, General Chemical Resistance, Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin BN9003G
Manufacturer:
Polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CRX1005
Manufacturer:
NORYL™
Injection Molding
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CRX1005
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN9003G
Manufacturer:
NORYL™
non-reinforced, blow moldable, low warpage, dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced, blow moldable, low warpage, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310
Manufacturer:
NORYL™
Injection moldable, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection moldable, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310
Manufacturer:
NORYL™
Non-reinforced blend, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731S
Manufacturer:
NORYL™
FC EU, FDA food contact compliant and has NSF/ANSI 61, ACS, WRAS, and KTW/W270 listings for selected colors and manufacturing locations
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
FC EU, FDA food contact compliant and has NSF/ANSI 61, ACS, WRAS, and KTW/W270 listings for selected colors and manufacturing locations
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731F
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310F
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731S
Manufacturer:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN31
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), good low temperature impact strength, heat resistance, excellent processability, Low warpage, and dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), good low temperature impact strength, heat resistance, excellent processability, Low warpage, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731F
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731S
Manufacturer:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310F
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310RC5
Manufacturer:
NORYL™
unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more