HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PPO534
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PN235
Manufacturer:
NORYL™
Injection Molding, Hydrolytically Stable
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PN235
Manufacturer:
NORYL™
exhibits good impact resistance along with low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exhibits good impact resistance along with low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NHP8010T3
Manufacturer:
High impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NHP8010T3
Manufacturer:
High impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NHP8000VT3
Manufacturer:
NORYL™
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, high impact, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, high impact, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NH8000
Manufacturer:
NORYL™
Non-reinforced, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4775
Manufacturer:
NORYL
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4775
Manufacturer:
high heat, thin wall extrusion and injection moldable grade, modulus at elevated temperature, good chemical resistance
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat, thin wall extrusion and injection moldable grade, modulus at elevated temperature, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NP6100
Manufacturer:
NORYL™
High heat resistance, good strength, toughness, robust FR performance
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good strength, toughness, robust FR performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4775
Manufacturer:
high heat, thin wall extrusion and injection moldable grade, modulus at elevated temperature, good chemical resistance
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat, thin wall extrusion and injection moldable grade, modulus at elevated temperature, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NHP8000VT3
Manufacturer:
NORYL™
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, high impact, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, ultra-thin-wall FR, High tracking resistance performance, high impact, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NP6100
Manufacturer:
NORYL™
High heat resistance, good strength, toughness, robust FR performance
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good strength, toughness, robust FR performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4752
Manufacturer:
NORYL™
high heat resistance, dimensional stability, translucent with a yellow tint
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat resistance, dimensional stability, translucent with a yellow tint
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NHP7020T3
Manufacturer:
NORYL™
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4752
Manufacturer:
high heat blend, translucent, high heat resistance, dimensional stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat blend, translucent, high heat resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4752F
Manufacturer:
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NP6100
Manufacturer:
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NP6100
Manufacturer:
High heat resistance, good strength, toughness, robust FR performance
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good strength, toughness, robust FR performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4752
Manufacturer:
high heat blend, translucent, high heat resistance, dimensional stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat blend, translucent, high heat resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more