HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
NORYL™ Resin PX1185
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1134
Manufacturer:
NORYL™
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1112
Manufacturer:
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin PX1134
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4775F
Manufacturer:
NORYL™
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX1201
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0844
Manufacturer:
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX1201
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX1201
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4775F
Manufacturer:
NORYL™
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPO534
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX0901
Manufacturer:
NORYL™
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX1201
Manufacturer:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4775
Manufacturer:
NORYL™
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX1201
Manufacturer:
NORYL™
Low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0844
Manufacturer:
non-reinforced blend
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PVX0901
Manufacturer:
NORYL™
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PKN4775
Manufacturer:
NORYL™
high heat, thin wall extrusion and injection moldable
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat, thin wall extrusion and injection moldable
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more