HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Terraprene® SI 601 70A nat
Manufacturer:
FKuR Kunststoff GmbH
Good mechanical properties, good flow properties
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good mechanical properties, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styrolux® ECO S BC100
Manufacturer:
INEOS Styrolution
clear, rigid, high performance film extrusion
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
clear, rigid, high performance film extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3G46
Manufacturer:
INEOS Styrolution
specifically designed for sheet- and film-extrusion and thermoformed articles, excellent balance of transparency and toughness, medical applications, Gamma, X-ray & ETO sterilizable
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
specifically designed for sheet- and film-extrusion and thermoformed articles, excellent balance of transparency and toughness, medical applications, Gamma, X-ray & ETO sterilizable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styrolux® 693D
Manufacturer:
INEOS Styrolution
balanced properties in terms of toughness and clarity
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
balanced properties in terms of toughness and clarity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LG428N
Manufacturer:
Good Adhesion
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LG411
Manufacturer:
Good Adhesion
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Dryflex® AM 75A301B
Manufacturer:
Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SB
Manufacturer:
Good Adhesion
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Dryflex® AM 55A201B
Manufacturer:
SB
Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Dryflex® AM 65A301B
Manufacturer:
SB
Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
8344
Manufacturer:
North America, Europe, Asia Pacific
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
North America, Europe, Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM 1502 T
Manufacturer:
Special Characteristics
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
65A302B
Manufacturer:
U.V. stabilized or stable to weather, Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
75A302B
Manufacturer:
U.V. stabilized or stable to weather, Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Anti Slip, Low Fogging, Low Odor, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Dryflex® AM 55A202B
Manufacturer:
Injection Molding
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SAN 320N A
Manufacturer:
Kumho Petrochemical Co., Ltd.
No Characteristics
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KOSTIL® B 266
Manufacturer:
Versalis S.p.A
high clarity, good mechanical properties, transparent
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high clarity, good mechanical properties, transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KOSTIL® B 266
Manufacturer:
good chemical resistance, very low residual monomers content, high clarity, good mechanical properties
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemical resistance, very low residual monomers content, high clarity, good mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SAN-GF20_TOYOLAC® ASG-20
Manufacturer:
Pellets
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Kynar® 761
Manufacturer:
ARKEMA
Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more