HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15663 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
ELCRIN™ DI001EXG
制造商:
LNP™
Internally Lubricated, Easy Molding, Wear Resistant
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Easy Molding, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Bayblend® T88 GF-10
制造商:
科思创德国公司
optimized heat ageing- and UV-stability, very good flow, good heat resistance
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
optimized heat ageing- and UV-stability, very good flow, good heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Bayblend® T90 MF-20
制造商:
科思创德国公司
High impact or impact modified
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Bayblend® T88 GF-30
制造商:
None
optimized heat ageing- and UV-stability, very good flow
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
optimized heat ageing- and UV-stability, very good flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
307 SI 2
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Bayblend® T88 GF-20
制造商:
科思创德国公司
Vicat/B 120 temperature = 130 °C, optimized heat ageing- and UV-stability, very good flow, good heat resistance
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Vicat/B 120 temperature = 130 °C, optimized heat ageing- and UV-stability, very good flow, good heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
T88 GF-10 RE
制造商:
贝文蓝
Special Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Bayblend® T88 GF-10 HI
制造商:
None
very good flow, improved impact strength, improved elongation at break
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good flow, improved impact strength, improved elongation at break
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 TFE 5 UV
制造商:
RTP
Injection Molding
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
301 SI 2 Z
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Bayblend® T88 GF-20 HI
制造商:
None
Vicat/B 120 temperature = 134 °C, optimized heat ageing- and UV-stability, very good flow
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Vicat/B 120 temperature = 134 °C, optimized heat ageing- and UV-stability, very good flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 TFE 7 SE A
制造商:
RTP
Injection Molding
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 HF TFE 10
制造商:
RTP
Injection Molding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 TFE 10
制造商:
RTP
Injection Molding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 300 TFE 5 FR L
制造商:
RTP公司
Flame retardant
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 HF TFE 15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 TFE 20
制造商:
RTP
Injection Molding
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 TFE 15 FR
制造商:
RTP
Flame retardant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
300 TFE 15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PZ400BK10
制造商:
None
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 15663 materials | Scroll down for more