HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15663 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 UV 16104 WT2287-09TL PC-X
制造商:
None
UV stabilised
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PC 740/171 GY1127-04LD PC-X
制造商:
None
translucent,light scattering,high light diffusion,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 UV 15003 CC1002-15 PC-X
制造商:
None
translucent,light scattering,dependent on wall thickness,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,dependent on wall thickness,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 UV 15091 GY1138-15 PC-X
制造商:
None
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 UV 15003 CC1005-15 PC-X
制造商:
None
high light transmission,dependent on wall thickness,light scattering,high light diffusion,dependent on wall thickness,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,dependent on wall thickness,light scattering,high light diffusion,dependent on wall thickness,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PC 740/4 BL1435-07LD PC-X
制造商:
None
translucent,light scattering,high light diffusion,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PWL 10/1 WT1130-09LB PC-X15
制造商:
None
highly reflective,opaque,impact modified
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD PC 1000 17052 WT1168-16 PC-X
制造商:
None
high light transmission,light scattering,easy release (demoulding),processing stabilised,injection moulding grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,light scattering,easy release (demoulding),processing stabilised,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 UV 14019 WT1030-14 PC-X
制造商:
None
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Makrolon® DS801 PC-QD40
制造商:
科思创德国公司
{'molding_shrinkage_parallel': '0.3 %', 'molding_shrinkage_normal': '0.3 %', 'tensile_modulus': '4800 MPa', 'tensile_strength': '60 MPa', 'flexural_modulus': '5000 MPa', 'flexural_strength': '110 MPa', 'charpy_impact_strength_23c': '30 kJ/m²', 'puncture_maximum_force_23c': '400 N', 'puncture_energy_23c': '1 J', 'ball_indentation_hardness': '175 MPa', 'temperature_of_deflection_under_load_1_80MPa': '129 °C', 'temperature_of_deflection_under_load_0_45MPa': '136 °C', 'vicat_softening_temperature': '141 °C', 'coefficient_of_linear_thermal_expansion_parallel': '47 E-6/K', 'coefficient_of_linear_thermal_expansion_normal': '46 E-6/K', 'oxygen_index': '35 %'}
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'molding_shrinkage_parallel': '0.3 %', 'molding_shrinkage_normal': '0.3 %', 'tensile_modulus': '4800 MPa', 'tensile_strength': '60 MPa', 'flexural_modulus': '5000 MPa', 'flexural_strength': '110 MPa', 'charpy_impact_strength_23c': '30 kJ/m²', 'puncture_maximum_force_23c': '400 N', 'puncture_energy_23c': '1 J', 'ball_indentation_hardness': '175 MPa', 'temperature_of_deflection_under_load_1_80MPa': '129 °C', 'temperature_of_deflection_under_load_0_45MPa': '136 °C', 'vicat_softening_temperature': '141 °C', 'coefficient_of_linear_thermal_expansion_parallel': '47 E-6/K', 'coefficient_of_linear_thermal_expansion_normal': '46 E-6/K', 'oxygen_index': '35 %'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 14050 GY1118-14 PC-X
制造商:
None
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 UV 14013 CC1019-14 PC-X
制造商:
None
high light transmission,light scattering,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,light scattering,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD PC 1000 UV 14012 GY1016-14 PC-X
制造商:
None
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 14008 WT1009-14 PC-X
制造商:
None
translucent,light scattering,high light diffusion,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD2 PC 1000 UV 14001 WT1007-14 PC-X
制造商:
None
translucent,light scattering,high light diffusion,UV stabilised,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,UV stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD PC 1000 UV 15072 GY1121-15 PC-X
制造商:
None
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PWL 10/1.1 WT1302-05LB PC-X15
制造商:
None
highly reflective,opaque,easy release (demoulding),injection moulding grade,UV stabilised
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,easy release (demoulding),injection moulding grade,UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LD PC 1000 UV 14096 GY1200-14 PC-X
制造商:
None
translucent,light scattering,high light diffusion,dependent on wall thickness,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,dependent on wall thickness,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Makrolon® TC110 PC-T30
制造商:
None
Thermally Conductive
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM LB PC 1000 14073 WT1164-14
制造商:
None
highly reflective,improved surface appearance,easy flow
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,improved surface appearance,easy flow
Recorded properties are for screening; verify source data and conditions.
Total 15663 materials | Scroll down for more
