HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15663 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PP-Z20_RamReduce PPC701U4BR72
制造商:
None
contains renewable resources
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W70
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W70
制造商:
None
Other Extrusion
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W60
制造商:
None
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W40
制造商:
None
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W40
制造商:
None
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W45
制造商:
None
Medium-Low degree of fluidity; good overall balance of mechanical and thermal properties, high impact and mechanical stress resistance
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium-Low degree of fluidity; good overall balance of mechanical and thermal properties, high impact and mechanical stress resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W35
制造商:
None
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W35
制造商:
None
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses even less than 3 mm; good overall balance of mechanical and thermal properties, high impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W40
制造商:
None
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High degree of fluidity for injection molding of parts with thicknesses ≥ 3 mm; good overall balance of mechanical and thermal properties. High flexural strength.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50
制造商:
None
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPC-40T Nat
制造商:
None
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPCT40
制造商:
DOMO
Copolymer
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-T30 2563PCX TA6
制造商:
None
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-T30 2564PCX TA6
制造商:
None
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-T30 Polimaxx 2511PCX TA6
制造商:
None
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPC-30T UV EXT 1148
制造商:
Maxxam™
Injection Molding Copolymer
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPCT30
制造商:
DOMO
Copolymer
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPC346T5NT
制造商:
拉姆欧芬
Injection Molding Copolymer
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPC5003T5GR430
制造商:
RamOfin
Flame retardant, Halogen-free
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Total 15663 materials | Scroll down for more
