HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LS-4960
Manufacturer:
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LSR 9151-200P
Manufacturer:
Good Adhesion, Chemical Resistance, General Chemical Resistance
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Chemical Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS 5-2040
Manufacturer:
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS-40
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SILASTIC™ LS 5-8750
Manufacturer:
SI
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS-70
Manufacturer:
SILASTIC™
Injection Molding, Other Extrusion, Calandering, Solvent Resistance, Oil Resistance
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering, Solvent Resistance, Oil Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS 5-8725
Manufacturer:
SILASTIC™
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LTC 9400-40
Manufacturer:
SILASTIC™
Injection Molding
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS 4-9080
Manufacturer:
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS 2940 U
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SILASTIC™ LS 4-9040
Manufacturer:
Injection Molding, Other Extrusion, Calandering Solvent Resistance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering Solvent Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS 5-8761
Manufacturer:
SILASTIC™
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS 5-8760
Manufacturer:
SILASTIC™
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SILASTIC™ LS 2970 U
Manufacturer:
SI
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LS 2840
Manufacturer:
SILASTIC™
Injection Molding, Other Extrusion, Calandering
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LCF 5120
Manufacturer:
Good Adhesion, High Gloss
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SILASTIC™ HV 1523-30
Manufacturer:
SI
Not specified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DY 35-5088
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LCF 3760
Manufacturer:
SILASTIC™
Good Adhesion
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SILASTIC™ HV 1510-40
Manufacturer:
SI
Injection Molding, Translucent
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Translucent
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more