HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
W-30
Manufacturer:
AMORVON
Low Warpage
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF30 LG WL
Manufacturer:
Badatron
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF30
Manufacturer:
General Purpose
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Purpose
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURAFIDE® 1130A64
Manufacturer:
Polyplastics
No Characteristics
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FORTRON® 1115L0
Manufacturer:
High melt strength, suitable for blow molding and extrusion
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High melt strength, suitable for blow molding and extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF30
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURAFIDE® 1130T6
Manufacturer:
High impact or impact modified, Creep Resistance, Weldable, Chemical Resistance, Hydrolytically Stable
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Creep Resistance, Weldable, Chemical Resistance, Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF30 DURAFIDE® 1130A1
Manufacturer:
No Characteristics
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF20
Manufacturer:
Injection Molding
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF20
Manufacturer:
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF20
Manufacturer:
Heat stabilized or stable to heat, Laser Weldable, General Chemical Resistance
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Laser Weldable, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF20_FORTRON® CES51
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS GF30 LG
Manufacturer:
Badatron®
Injection Molding
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF10 RTP 1301
Manufacturer:
Flame retardant
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R-7-190BL
Manufacturer:
Injection Molding RoHS compliant
Physical Properties
Density
2.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R-7-220BL
Manufacturer:
No Characteristics
Physical Properties
Density
1.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R-7-232NA
Manufacturer:
Ryton
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
Physical Properties
Density
1.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Ryton® XE4050BL
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more