HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PPS C GF 40 black (6101)
Manufacturer:
CompaFid
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.66
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xytron™ G3020T
Manufacturer:
Injection Molding, Special Characteristics: Flame retardant
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Special Characteristics: Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Badatron® PPS GF40 LG S2
Manufacturer:
No Characteristics
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF40 black 9005
Manufacturer:
AUROtron®
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF40
Manufacturer:
No Characteristics
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xytron™ G3080R
Manufacturer:
Flame Retardant, Excellent Mold Release, Low Flash
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant, Excellent Mold Release, Low Flash
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound OF006IXQ
Manufacturer:
LNP™
Impact Modified, High Heat Resistance, Chemical Resistance
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, High Heat Resistance, Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound OF006N
Manufacturer:
LNP
High heat resistance, high impact strength, excellent chemical resistance, low chloride contents, good warpage control, inherently flame-retardant
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, high impact strength, excellent chemical resistance, low chloride contents, good warpage control, inherently flame-retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound OF006I
Manufacturer:
LNP™
High impact or impact modified
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF30 RTP 1305
Manufacturer:
Injection Molding
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound OF006N
Manufacturer:
LNP™
High heat resistance, high impact strength, excellent chemical resistance, low chloride contents, good warpage control
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, high impact strength, excellent chemical resistance, low chloride contents, good warpage control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Ryton® XE5030BL
Manufacturer:
High impact or impact modified, Ductile, Thermal Stability
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Ductile, Thermal Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Ryton® XE5430NA
Manufacturer:
High impact or impact modified, Ductile, Thermal Stability, Chemical Resistance, General Chemical Resistance
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Ductile, Thermal Stability, Chemical Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Titan 7600GF
Manufacturer:
No Characteristics
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOTUF™ Compound OF006IXQ
Manufacturer:
Impact Modified, High Heat Resistance and Chemical Resistance
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, High Heat Resistance and Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF30 RTP 1305 C
Manufacturer:
Injection Molding
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF30 RTP 1305
Manufacturer:
Flame retardant
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OF006
Manufacturer:
LNP™ THERMOCOMP™
{'tensile_modulus': '12000 MPa', 'tensile_strength': '126 MPa', 'strain_at_break': '1.3 %', 'flexural_modulus': '10500 MPa', 'charpy_impact_23c': '24 kJ/m²', 'charpy_notched_impact_23c': '5 kJ/m²', 'izod_notched_impact': '58 J/m', 'melting_point': None, 'tg': None, 'hdt_180': '276 °C', 'hdt_045': '261 °C', 'vicat_softening': None}
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'tensile_modulus': '12000 MPa', 'tensile_strength': '126 MPa', 'strain_at_break': '1.3 %', 'flexural_modulus': '10500 MPa', 'charpy_impact_23c': '24 kJ/m²', 'charpy_notched_impact_23c': '5 kJ/m²', 'izod_notched_impact': '58 J/m', 'melting_point': None, 'tg': None, 'hdt_180': '276 °C', 'hdt_045': '261 °C', 'vicat_softening': None}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OF006
Manufacturer:
Not specified
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OF006A
Manufacturer:
LNP™ THERMOCOMP™
High-performance thermoplastic
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High-performance thermoplastic
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more