HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PPS-GF
Manufacturer:
No Characteristics
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AQUALOY® TR314-1
Manufacturer:
No Characteristics
Physical Properties
Density
1.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1302 P-1
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF RTP 1399 X 130032 A
Manufacturer:
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Therma-Tech™ TT9200-5001 EI White
Manufacturer:
Thermally Conductive
Physical Properties
Density
2.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AQUALOY® TR314-2
Manufacturer:
No Characteristics
Physical Properties
Density
1.84
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AQUALOY® TR314-3B
Manufacturer:
No Characteristics
Physical Properties
Density
1.83
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1309 P-1
Manufacturer:
No Characteristics
Physical Properties
Density
1.77
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF65
Manufacturer:
No Characteristics
Physical Properties
Density
1.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
L 9113-2
Manufacturer:
high stiffness
Physical Properties
Density
1.87
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TEDUR L 9200-1 U
Manufacturer:
high toughness,high stiffness,low warpage,low anisotropic shrinkage
Physical Properties
Density
1.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high toughness,high stiffness,low warpage,low anisotropic shrinkage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TEDUR L 9116-1
Manufacturer:
low warpage,high toughness,high stiffness
Physical Properties
Density
1.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage,high toughness,high stiffness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OF00AN
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OF00AN
Manufacturer:
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OFM46
Manufacturer:
high stiffness and strength, excellent dimensional stability and warpage control, good flame and chemical resistance, low coefficient of thermal expansion and moisture absorption
Physical Properties
Density
1.77
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness and strength, excellent dimensional stability and warpage control, good flame and chemical resistance, low coefficient of thermal expansion and moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF60
Manufacturer:
high stiffness,injection moulding grade
Physical Properties
Density
1.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF50
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Physical Properties
Density
1.72
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound OF008G
Manufacturer:
LNP™
Injection Molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPS-GF50
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Physical Properties
Density
1.72
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TEDUR L 9114-1 S
Manufacturer:
high stiffness,injection moulding grade
Physical Properties
Density
1.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more