HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ISPLEN® PP 040 G1E
Manufacturer:
Homopolymer
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 031 G1E
Manufacturer:
Sheet Extrusion Monofilament
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Sheet Extrusion Monofilament
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 086 U6E
Manufacturer:
Homopolymer
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 060 G1M
Manufacturer:
No Characteristics
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 080 G2M
Manufacturer:
Packaging, Chemical Resistance
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Packaging, Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PP 070 Y1E
Manufacturer:
Fiber Extrusion
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Fiber Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PP 030 G1E
Manufacturer:
Homopolymer
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB500K1M
Manufacturer:
Anti-static, High impact or impact modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti-static, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 199 A3M
Manufacturer:
Low Warpage, Copolymer
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 300A3M
Manufacturer:
Injection Molding, Anti-static, Low Warpage, Nucleated, Copolymer
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Anti-static, Low Warpage, Nucleated, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 180 G2M
Manufacturer:
No Characteristics
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 190 K2M
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 181 N2M
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 179K1M
Manufacturer:
Anti-static, High impact or impact modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti-static, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 182 G2M
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 176 N4M
Manufacturer:
Automotive, Packaging
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Automotive, Packaging
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 171 H1M
Manufacturer:
Low Warpage, Copolymer
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 195 K3M
Manufacturer:
Injection Molding
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISPLEN® PB 131A029
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP_ISPLEN® PB 180 A4M
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more