HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Moplen EP300U
Manufacturer:
No Characteristics
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EP300H
Manufacturer:
Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP310M HP
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP300K
Manufacturer:
Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP3046
Manufacturer:
Nucleated, Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nucleated, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EP300R
Manufacturer:
Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP300H
Manufacturer:
Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP300R
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP300L
Manufacturer:
High impact or impact modified
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP2838
Manufacturer:
Injection Molding, Compression Molding, Nucleated, Copolymer, Impact Copolymer, Additives
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Compression Molding, Nucleated, Copolymer, Impact Copolymer, Additives
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EP2464
Manufacturer:
Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion, Blow Thermal Stability, Copolymer Molding
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion, Blow Thermal Stability, Copolymer Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP229R
Manufacturer:
Low Neck-In, Melt Strength, Copolymer, Impact Copolymer
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Neck-In, Melt Strength, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP222D
Manufacturer:
High impact or impact modified, Good Adhesion, Heat Sealable, Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Good Adhesion, Heat Sealable, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP2641
Manufacturer:
Nucleated, Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nucleated, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EP300C
Manufacturer:
Melt Strength, Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Melt Strength, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP300C
Manufacturer:
Profile Extrusion, Sheet Extrusion, Thermoforming
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Profile Extrusion, Sheet Extrusion, Thermoforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EF300K
Manufacturer:
Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP240P
Manufacturer:
Nucleated, Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nucleated, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP243R
Manufacturer:
Injection Molding Low Warpage, Nucleated, Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Warpage, Nucleated, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen EP240T
Manufacturer:
Nucleated, Copolymer, Impact Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nucleated, Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more