HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PPcompound 8536B
Manufacturer:
No Characteristics
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7727
Manufacturer:
No Characteristics
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8611A
Manufacturer:
impact modified
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7995
Manufacturer:
mineral filled, high flow, good scratch resistance, good stiffness, broad processing window, good esthetical performance
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled, high flow, good scratch resistance, good stiffness, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8502
Manufacturer:
modified mineral filled
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
modified mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7715
Manufacturer:
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8500
Manufacturer:
No Characteristics
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7890A
Manufacturer:
high flow, good scratch resistance, anti static properties, low density, good stiffness, broad processing window, good esthetical performance
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, good scratch resistance, anti static properties, low density, good stiffness, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7707
Manufacturer:
No Characteristics
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8510E
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7890
Manufacturer:
high flow, good scratch resistance, low density, good stiffness, broad processing window, good esthetical performance
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, good scratch resistance, low density, good stiffness, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7990E
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7716
Manufacturer:
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance, excellent UV exterior stabilization
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, medium impact, good flow, broad processing window, good esthetical performance, excellent UV exterior stabilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8250U
Manufacturer:
mineral filled
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 8501
Manufacturer:
No Characteristics
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7706
Manufacturer:
high scratch resistance, high stiffness, good impact and high flow
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, good impact and high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7795
Manufacturer:
high scratch resistance, good stiffness, high impact and excellent flow
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, good stiffness, high impact and excellent flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 6604/5
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7536
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 6614
Manufacturer:
mineral filled, high flow, good impact, high stiffness level, low shrinkage, CLTE
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled, high flow, good impact, high stiffness level, low shrinkage, CLTE
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more