HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
K 401
Manufacturer:
Low Odor, Tribologic Grade
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
K 201
Manufacturer:
LUBEFLON®
Low Odor, Tribologic Grade
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
K 301
Manufacturer:
Low Odor, Tribologic Grade
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ GN7045
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
2.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PTFE_INOFLON™ M690
Manufacturer:
Film Extrusion, Sheet Extrusion
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Film Extrusion, Sheet Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ 515
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ GN7500
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
2.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ M280
Manufacturer:
Pipe/Tube Extrusion, Other Extrusion
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pipe/Tube Extrusion, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ MGN7065
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ 610
Manufacturer:
Gujarat Fluorochemicals Limited
Low Smoke, Tribologic Grade
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Smoke, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ GN7300
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
2.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PTFE INOFLON™ 630
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ M695
Manufacturer:
Film Extrusion, Sheet Extrusion
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Film Extrusion, Sheet Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
K 100
Manufacturer:
LUBEFLON®
Low Odor, Tribologic Grade
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ 510
Manufacturer:
Low Smoke, Tribologic Grade
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Smoke, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GN7001
Manufacturer:
Powder, White
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Powder, White
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MGN7045
Manufacturer:
INOFLOON™
Tribologic Grade, Weldable
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ GN7003
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ GN7040
Manufacturer:
Tribologic Grade, Weldable
Physical Properties
Density
2.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INOFLON™ M295
Manufacturer:
No Characteristics
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more