HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
MEGOL™ P13 A60X3
Manufacturer:
Injection Molding
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SH D50 MC009
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Nilflex SH A20 MC009
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ PUG
Manufacturer:
U.V. stabilized or stable to weather, Transparent
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Nilflex SH A30 MC009
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ WR
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ TA
Manufacturer:
Injection Molding
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Nilflex SH A60 MC009
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Nilflex SH A40 MC009
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Nilflex SH A70 MC009
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Nilflex SH A0 MN001
Manufacturer:
No Characteristics
Physical Properties
Density
0.87
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ P08 A60X3
Manufacturer:
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance, Anti-static, U.V. stabilized or stable to weather
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance, Anti-static, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Nilflex SH A80 MC009
Manufacturer:
Processing
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ HT
Manufacturer:
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ Flame retardant
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ P06 A60X3
Manufacturer:
Acid Resistance, Alkali Resistance, Ozone Resistance
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acid Resistance, Alkali Resistance, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ A 60/A1
Manufacturer:
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance, Anti-static, U.V. stabilized or stable to weather
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance, Anti-static, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ DP2339
Manufacturer:
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing, Chemical Resistance, Injection Molding, Acid Resistance, Alkali Resistance, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ DP2268/65PA12
Manufacturer:
Injection Molding, U.V. stabilized or stable to weather, Good Adhesion, Chemical Resistance, Acid Resistance, Alkali Resistance, Ozone Resistance
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, U.V. stabilized or stable to weather, Good Adhesion, Chemical Resistance, Acid Resistance, Alkali Resistance, Ozone Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MEGOL™ DP2217/90PBT
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more