HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15672 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
DF2041
Manufacturer:
LNP LUBRILOY™
Wear Resistant
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRILOY™ Compound DF204
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D251RCC
Manufacturer:
Colorable, High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Colorable, High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound DFI14
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HFD4472
Manufacturer:
LEXAN™
High impact or impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ EXL4312
Manufacturer:
LNP™
High impact or impact modified
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ ML4412
Manufacturer:
LNP™
medium flow, impact modified injection moldable grade
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, impact modified injection moldable grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ ML4412
Manufacturer:
LNP™
medium flow, impact modified injection moldable grade
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, impact modified injection moldable grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HFD4412
Manufacturer:
LEXAN™
high flow and superior surface appearance
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow and superior surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HFD4412
Manufacturer:
LEXAN™
High flow and superior surface appearance
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow and superior surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HFD4412
Manufacturer:
LEXAN™
Injection Molding
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GSH3120R
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
C242 B15
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
C242 B21
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GSH2020DR 9913A
Manufacturer:
IT / Business Machine
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
IT / Business Machine
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
C242 LWB04
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EMERGE™ PC 4902
Manufacturer:
Flame retardant
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P1310G20 HB
Manufacturer:
Hylex
Injection Molding U.V. stabilized or stable to weather
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hylex® P1010G20FRMA
Manufacturer:
Ravago Manufacturing Americas
Flame retardant
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PC 740/4 GF20 UV WT1105-13LD
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Total 15672 materials | Scroll down for more