HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15672 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX07408
Manufacturer:
LNP™
Flame Retardant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF008ER
Manufacturer:
LNP™
Easy Molding, Mold Release
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D452
Manufacturer:
LNP™
High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D451RC
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D451RC
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 35%
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D451
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D451
Manufacturer:
High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P1310G40 HB
Manufacturer:
Injection Molding U.V. stabilized or stable to weather
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GSH2040R2
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GSH3140R
Manufacturer:
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon EGN2040DF
Manufacturer:
Flame retardant, Phosphorus-free
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GSH2040DF
Manufacturer:
Low Warpage
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GPN2040DF
Manufacturer:
Flame retardant
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO NH-3402F
Manufacturer:
Injection Molding
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
P1010G40 HB
Manufacturer:
Hylex®
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
UG30FV
Manufacturer:
Regional Availability
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCANTEC PC S60R GF30
Manufacturer:
Injection Molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCANTEC PC S75R GF30 V0
Manufacturer:
Flame retardant
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCANTEC PC S60R GF30 V0_AB
Manufacturer:
Flame retardant
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCANTEC PC S75R GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 15672 materials | Scroll down for more