HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15672 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 14008 WT1009-14
Manufacturer:
translucent,light scattering,high light diffusion,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 15072 GY1121-15
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 14012 GY1016-14
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 17052 WT1168-16
Manufacturer:
high light transmission,light scattering,easy release (demoulding),processing stabilised,injection moulding grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,light scattering,easy release (demoulding),processing stabilised,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LB PC 1000 16061 GY1068-16
Manufacturer:
highly reflective,opaque
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC110 FR
Manufacturer:
Makrolon
Flame retardant, Thermally Conductive
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DTK22
Manufacturer:
Thermally Conductive and Electrically Insulative
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive and Electrically Insulative
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TC110 FR
Manufacturer:
Makrolon
Flame retardant, Thermally Conductive
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DTK22
Manufacturer:
Thermally Conductive and Electrically Insulative
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive and Electrically Insulative
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound DX07323
Manufacturer:
LNP™
Electrically Conductive, Impact Modified, meet ATEX requirements
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Impact Modified, meet ATEX requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DM0051RC
Manufacturer:
LNP™ ELCRIN™
High Modulus, Good Flow, Good Ductility, Low Warpage, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Good Flow, Good Ductility, Low Warpage, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GN3101EF
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound DX07323
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Impact Modified, meet ATEX requirements
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Impact Modified, meet ATEX requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EP-SSPC_ElectriPlast
Manufacturer:
Injection Molding
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ET MS260
Manufacturer:
Opaque
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
C251 01
Manufacturer:
Flame retardant
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DS0036I
Manufacturer:
LNP™ FARADEX™
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DS0036I
Manufacturer:
LNP™ FARADEX™
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DS0026I
Manufacturer:
LNP™ FARADEX™
High Impact, Flame Retardant, Non-Brominated & Non-Chlorinated Flame Retardant, Electrically Conductive, EMI/RFI shielding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Impact, Flame Retardant, Non-Brominated & Non-Chlorinated Flame Retardant, Electrically Conductive, EMI/RFI shielding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
330 D FR
Manufacturer:
EMI
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Total 15672 materials | Scroll down for more