HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15672 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
GN1008RF
Manufacturer:
Flame retardant, Halogen-free, High impact or impact modified
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GN1000F
Manufacturer:
Flame retardant, Halogen-free, Transparent
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY GN1002FC
Manufacturer:
Flame retardant, Halogen-free, High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GN1004FA
Manufacturer:
Flame retardant, Halogen-free, High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY GN1006FL
Manufacturer:
Flame retardant, Halogen-free, Transparent
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY GP1000LG
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY GN1000FA
Manufacturer:
Flame retardant, Halogen-free, Transparent
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GN1006FT
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX14354X
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Flow, Superior Impact, Colorable, Non-Brominated, Non-Chlorinated Flame Retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Flow, Superior Impact, Colorable, Non-Brominated, Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX14354X
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Flow, Superior Impact, Colorable, Non-Brominated, Non-Chlorinated Flame Retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Flow, Superior Impact, Colorable, Non-Brominated, Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound D1000UF
Manufacturer:
LNP™
UV stabilized, impact modified, good low temperature ductility, high flow characteristics, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, impact modified, good low temperature ductility, high flow characteristics, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX11354
Manufacturer:
LNP™
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound RBX7245
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX11355
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX11354X
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Colorable
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Colorable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX11354X
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Colorable
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Impact, Colorable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound D1000FRD
Manufacturer:
LNP™
impact modified, good Low temperature ductility, medium flow characteristics, excellent surface aesthetics, excellent knit line strength, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, good Low temperature ductility, medium flow characteristics, excellent surface aesthetics, excellent knit line strength, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound D1000FRD
Manufacturer:
LNP™
impact modified, good Low temperature ductility, medium flow characteristics, excellent surface aesthetics, excellent knit line strength, excellent processability
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, good Low temperature ductility, medium flow characteristics, excellent surface aesthetics, excellent knit line strength, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound RBX7245
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LubriOne™ LB3200-5007 Natural
Manufacturer:
Injection Molding Tribologic Grade
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Total 15672 materials | Scroll down for more