HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15672 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Makrolon® 1804
Manufacturer:
flame retardant, UV stabilized, optimized for low plate-out, solid sheet
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flame retardant, UV stabilized, optimized for low plate-out, solid sheet
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SC1004L
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2258 RE
Manufacturer:
medical devices, suitable for ETO and steam sterilization at 121 °C, biocompatible according to many ISO 10993-1 test requirements, low viscosity, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medical devices, suitable for ETO and steam sterilization at 121 °C, biocompatible according to many ISO 10993-1 test requirements, low viscosity, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 1205
Manufacturer:
high viscosity, solid sheet
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high viscosity, solid sheet
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2258
Manufacturer:
medical devices, suitable for ETO and steam sterilization at 121 °C, biocompatible according to many ISO 10993-1 test requirements, low viscosity, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medical devices, suitable for ETO and steam sterilization at 121 °C, biocompatible according to many ISO 10993-1 test requirements, low viscosity, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 1837 MAS081
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SR3108L
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SR3108FC
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SC1004A
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2256
Manufacturer:
food contact quality, low viscosity, easy release
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
food contact quality, low viscosity, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2205 RE
Manufacturer:
General purpose, low viscosity, easy release, Partially bio-circular grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose, low viscosity, easy release, Partially bio-circular grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY SC1004ML
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 2207
Manufacturer:
general purpose, low viscosity, UV stabilized, easy release
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
general purpose, low viscosity, UV stabilized, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® 205 R50
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SR3108FM
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SC1004AU
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY PC 3010-10
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY PC 1303-07
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY PC 3010-15
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY PC 3030-08
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Total 15672 materials | Scroll down for more