HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (15672 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Makrolon® AL2647
Manufacturer:
UV stabilized, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AL2647 RE CQ
Manufacturer:
UV stabilized, weather stable, renewable resources
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, weather stable, renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AL2447
Manufacturer:
low viscosity, UV stabilized, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity, UV stabilized, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2657
Manufacturer:
Injection Molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AG2677 RE
Manufacturer:
UV stabilized, easy release, automotive glazing, roof modules, Partially bio-circular grade
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release, automotive glazing, roof modules, Partially bio-circular grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2417
Manufacturer:
UV stabilized, easy release, Automotive interior, developed for high-gloss surfaces with highest requirements
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release, Automotive interior, developed for high-gloss surfaces with highest requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2497
Manufacturer:
UV stabilized, easy release, Automotive interior, developed for high-gloss surfaces with highest requirements
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release, Automotive interior, developed for high-gloss surfaces with highest requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2457
Manufacturer:
UV stabilized, easy release, Automotive interior, developed for high-gloss surfaces with highest requirements
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release, Automotive interior, developed for high-gloss surfaces with highest requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2215
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2617
Manufacturer:
UV stabilized, Transparent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2497 ST
Manufacturer:
Automotive interior grade with specified sensor signal transparency
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Automotive interior grade with specified sensor signal transparency
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Ai2217
Manufacturer:
low viscosity, easy release, UV stabilized, Transparent
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity, easy release, UV stabilized, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2497 RE
Manufacturer:
High Gloss
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AG2677
Manufacturer:
UV stabilized, easy release
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2217 RE
Manufacturer:
U.V. stabilized or stable to weather, High Gloss
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® AG2477
Manufacturer:
Injection Molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2417 ST
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2417 RE
Manufacturer:
UV stabilized, easy release, High Gloss
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized, easy release, High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2455
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® Ai2215 ST
Manufacturer:
High Gloss
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss
Recorded properties are for screening; verify source data and conditions.
Total 15672 materials | Scroll down for more