HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
IE-644-05
Manufacturer:
Room Temperature Cure
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Room Temperature Cure
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FX-8091
Manufacturer:
Innothane® InnoFR™
Room Temperature Cure
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Room Temperature Cure
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ColorFast® TPEU9000-70D (PUR+PC)
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GN7003
Manufacturer:
INOFLON™
Fiber Extrusion, Pipe/Tube Extrusion, Tribologic Grade, Weldable
Physical Properties
Density
2.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Fiber Extrusion, Pipe/Tube Extrusion, Tribologic Grade, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Vampstyr 0023 V0 PS
Manufacturer:
Flame retardant, High impact or impact modified, U.V. Europe stabilized or stable to weather
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified, U.V. Europe stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TF 1750 PTFE
Manufacturer:
Mechanical properties, Thermal properties, Electrical properties, Other properties, Film Properties
Physical Properties
Density
2.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mechanical properties, Thermal properties, Electrical properties, Other properties, Film Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PS TOTAL 533B
Manufacturer:
Food contact, Food approval FDA 21 CFR, US Pharmacopeia Class VI Approved
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Food contact, Food approval FDA 21 CFR, US Pharmacopeia Class VI Approved
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SUPREME SC 201 LV PS
Manufacturer:
Supreme Petrochem Ltd
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SUPREME SC 203 EL PS
Manufacturer:
Supreme Petrochem Ltd
High Gloss
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SC 206 HT PS
Manufacturer:
Supreme Petrochem Ltd
Transparent
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N 3982 PS
Manufacturer:
EDISTIR®
Special grade for direct gassing extrusion of heavy gauge insulating boards(XPS) foamed by blowing agents alternative to CFC and HCFC. Low viscosity process-aid and modifyer for compounding.
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special grade for direct gassing extrusion of heavy gauge insulating boards(XPS) foamed by blowing agents alternative to CFC and HCFC. Low viscosity process-aid and modifyer for compounding.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AT PS
Manufacturer:
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific, South and Central America
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific, South and Central America
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM MED PS 1000 AS 14114 PS
Manufacturer:
antistatic - permanent
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
antistatic - permanent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM MED PS 1000 AS 14115 PS
Manufacturer:
impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
GF-110 NT PSU-GF10
Manufacturer:
Grade, Biocompatibility ISO 10993
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Grade, Biocompatibility ISO 10993
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 4300 S-1020 Z (PSU+PC)-GF20
Manufacturer:
Not specified
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Mater-Bi EF04P PSAC
Manufacturer:
Novamont S.p.A
Blown Film Extrusion
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bioplast® 400 PSAC
Manufacturer:
BIOTEC
Contains renewable resources, Biodegradable, Compostable
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Biome HTX (450) PSAC
Manufacturer:
Biome Bioplastics Limited
Low shrinkage rate (0 - 0.5 %) compared to conventional polymers. Heat stabilized or stable to heat Europe
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low shrinkage rate (0 - 0.5 %) compared to conventional polymers. Heat stabilized or stable to heat Europe
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Biome HTX (450) PSAC
Manufacturer:
Biome Bioplastics Limited
Heat stabilized or stable to heat Europe
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat Europe
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more