HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
HSP 8344 (SBR+PPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HSP 8344 (SBR+PPE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
867 E UV
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to Europe, Near East/Africa heat, Transparent
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to Europe, Near East/Africa heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AM 55A202B
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KOSTIL® B 366
Manufacturer:
good chemicalresistance, very low residual monomers content, high clarity, easy flow grade, designed for molding of items with complex shapes and/or with thin walls with fast cycles, recommended for injection moulding
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemicalresistance, very low residual monomers content, high clarity, easy flow grade, designed for molding of items with complex shapes and/or with thin walls with fast cycles, recommended for injection moulding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KOSTIL® B 2661
Manufacturer:
good chemical resistance, very low residual monomers content, high clarity, good mechanical properties
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemical resistance, very low residual monomers content, high clarity, good mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SAN 2000 SAN
Manufacturer:
Regional Availability General Chemical Resistance Europe
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability General Chemical Resistance Europe
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
761A
Manufacturer:
Kynar®
chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermomechanical properties
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermomechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Kynar Flex® 2850-07
Manufacturer:
chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties
Physical Properties
Density
1.77
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Kynar Flex® 3030-50
Manufacturer:
Excellent crosslink efficiency, Very high flexibility, High melting point, Excellent low temperature impact resistance
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent crosslink efficiency, Very high flexibility, High melting point, Excellent low temperature impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
S1000S
Manufacturer:
Pipe/Tube Extrusion, Profile Extrusion General Purpose
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pipe/Tube Extrusion, Profile Extrusion General Purpose
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LCF PVC
Manufacturer:
Special Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3040 NATURAL LCF
Manufacturer:
Special Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Fiberloc™ 80520 PVC-GF20
Manufacturer:
Geon™
Not specified
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Vinyl Flexible R7545H
Manufacturer:
Special Characteristics Wire/Cable Extrusion, Coating, Flame retardant
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics Wire/Cable Extrusion, Coating, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
R174AE
Manufacturer:
Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D9501 NATURAL
Manufacturer:
Pellets
Physical Properties
Density
1.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Vinyl Flexible XV3878G (PVC+NBR)
Manufacturer:
Geon™
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Other
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Other
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VA-1600
Manufacturer:
Innothane®
Room Temperature Cure
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Room Temperature Cure
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HP-2170A
Manufacturer:
Room Temperature Cure
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Room Temperature Cure
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more