HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Badaflex® TPE-S 40A 1279 GR
Manufacturer:
Good Adhesion, Low Odor
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Badaflex® TPE-S 65A 5331
Manufacturer:
Good Adhesion
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPE-S 50A 5247 UV 2K S1
Manufacturer:
Badaflex®
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Badaflex® TPE-S 65A 5595LD S1
Manufacturer:
No Characteristics
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPE-S 65A 1393 2K
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Badaflex® TPE-S 30D 5116 2K S1
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPE-S 20A 1563
Manufacturer:
Badaflex®
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Terraprene® SI 701 45A nat
Manufacturer:
based on hydrated Styrene-Block-Copolymers and biobased polymers, containing mineral fillers. Good mechanical properties, good flow properties.
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
based on hydrated Styrene-Block-Copolymers and biobased polymers, containing mineral fillers. Good mechanical properties, good flow properties.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Terraprene® SI 801 80A nat
Manufacturer:
Good mechanical properties, good flow properties
Physical Properties
Density
0.98
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good mechanical properties, good flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Terraprene® SI 601 60A nat
Manufacturer:
Based on hydrated Styrene-Block-Copolymers and biobased polymers, containing mineral fillers. Good mechanical properties, good flow properties.
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Based on hydrated Styrene-Block-Copolymers and biobased polymers, containing mineral fillers. Good mechanical properties, good flow properties.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Terraprene® SI 601 65A nat
Manufacturer:
Good mechanical properties, good flow properties, Contains renewable resources
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good mechanical properties, good flow properties, Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styrolux® ECO 656C BC60 SB
Manufacturer:
INEOS Styrolution
enhanced flow properties, rigid, tough, high clarity, surface gloss, medical applications, Gamma, X-ray & ETO sterilizable, ISCC compliant
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
enhanced flow properties, rigid, tough, high clarity, surface gloss, medical applications, Gamma, X-ray & ETO sterilizable, ISCC compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styrolux® ECO T BC60 SB
Manufacturer:
INEOS Styrolution
tough, easy to process, high performance in film extrusion
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
tough, easy to process, high performance in film extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styrolux® 693D SB
Manufacturer:
INEOS Styrolution
intrinsic toughness, easy to process, works as modifier and compatibilizer, balanced properties in terms of toughness and clarity
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
intrinsic toughness, easy to process, works as modifier and compatibilizer, balanced properties in terms of toughness and clarity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styrolux® 656C SB
Manufacturer:
INEOS Styrolution
enhanced flow properties, rigid, tough, high levels of clarity and surface gloss
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
enhanced flow properties, rigid, tough, high levels of clarity and surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styroflex® ECO 2G66 BC100 SB
Manufacturer:
clear styrene butadiene copolymers (S-TPE)
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
clear styrene butadiene copolymers (S-TPE)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
65A301B SB
Manufacturer:
Injection Molding, Automotive
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AM 55A201B SB
Manufacturer:
Injection Molding Automotive
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CirKular+ C3000 SB
Manufacturer:
Performance Enhancement Series
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Performance Enhancement Series
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
75A301B SB
Manufacturer:
Injection Molding
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more