HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Estane® 58810 TPU
Manufacturer:
Pipe/Tube Extrusion, Wire/Cable Extrusion
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pipe/Tube Extrusion, Wire/Cable Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Estane® 58284 TPU
Manufacturer:
Processing, Wire/Cable Extrusion, Delivery form, Pellets, Chemical Resistance, General Chemical Resistance, Oil Resistance, Applications, General Purpose, Regional Availability, North America, Europe, Asia Pacific
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing, Wire/Cable Extrusion, Delivery form, Pellets, Chemical Resistance, General Chemical Resistance, Oil Resistance, Applications, General Purpose, Regional Availability, North America, Europe, Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Estane® 58070
Manufacturer:
Injection Molding, Pipe/Tube Extrusion, Wire/Cable Extrusion, Coating
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Wire/Cable Extrusion, Coating
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 785 A HPM
Manufacturer:
excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping characteristic and resilience performance
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping characteristic and resilience performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 754 D HPM
Manufacturer:
excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping characteristic and resilience performance
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping characteristic and resilience performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
785 A
Manufacturer:
excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping characteristic and resilience performance
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping characteristic and resilience performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
39070A
Manufacturer:
Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; free from plasticizers; high moisture vapor transmission rate
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; free from plasticizers; high moisture vapor transmission rate
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9855DU
Manufacturer:
very good hydrolysis and microbial resistance, very good low-temperature impact strength, opaque
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good hydrolysis and microbial resistance, very good low-temperature impact strength, opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 9873DU
Manufacturer:
very good hydrolysis and microbial resistance, very good low-temperature impact strength
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good hydrolysis and microbial resistance, very good low-temperature impact strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 9662DU
Manufacturer:
Extrusion- and injection molding grade with special UV stabilizers transparent up to 6 mm wall thickness very good hydrolysis and microbial resistance
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade with special UV stabilizers transparent up to 6 mm wall thickness very good hydrolysis and microbial resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 9370A GMP
Manufacturer:
Extrusion- and injection molding grade with special UV stabilizers, very good hydrolysis and microbial resistance, good low-temperature flexibility free from plasticizers, high moisture vapor transmission rate
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade with special UV stabilizers, very good hydrolysis and microbial resistance, good low-temperature flexibility free from plasticizers, high moisture vapor transmission rate
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 9380A
Manufacturer:
Extrusion- and injection molding grade very good hydrolysis and microbial resistance good low-temperature flexibility
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade very good hydrolysis and microbial resistance good low-temperature flexibility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9370AU
Manufacturer:
Extrusion- and injection molding grade with special UV stabilizers very good hydrolysis and microbial resistance good low-temperature flexibility free from plasticizers high moisture vapor transmission rate
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade with special UV stabilizers very good hydrolysis and microbial resistance good low-temperature flexibility free from plasticizers high moisture vapor transmission rate
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 85085A DPS055_AG
Manufacturer:
no yellowing under the action of UV light, improved microbial resistance, good low-temperature flexibility, Improved hydrolysis resistance
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
no yellowing under the action of UV light, improved microbial resistance, good low-temperature flexibility, Improved hydrolysis resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 786E
Manufacturer:
Extrusion- and injection molding grade high mechanical strength very good hydrolysis and microbial resistance good low-temperature flexibility
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade high mechanical strength very good hydrolysis and microbial resistance good low-temperature flexibility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3055DU
Manufacturer:
Injection molding grade with high mechanical strength for articles subject to wear with special UV stabilizers excellent abrasion resistance good wear resistance very short cycle times
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade with high mechanical strength for articles subject to wear with special UV stabilizers excellent abrasion resistance good wear resistance very short cycle times
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU_ColorRx® TPEU9500-70A-RX
Manufacturer:
No Characteristics
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPEU9000-50D
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU_ColorFast® TPEU9000-90A
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPEU9500-65D-RX
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more