HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ColorFast® TPEV7000-55A
Manufacturer:
No Characteristics
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPEV7000-75A
Manufacturer:
Regional Availability North America
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability North America
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALFATER XL A80I 2FE0002
Manufacturer:
high density,noise dampening,good weathering resistance,resistant to alkalis,good ozone reistance,good hot air resistance,good hydrolysis resistant
Physical Properties
Density
2.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high density,noise dampening,good weathering resistance,resistant to alkalis,good ozone reistance,good hot air resistance,good hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8170
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, US Pharmacopeia, Extrusion, Other Extrusion Class VI Approved
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, US Pharmacopeia, Extrusion, Other Extrusion Class VI Approved
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8180
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, US Pharmacopeia, Extrusion, Other Extrusion Class VI Approved
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, US Pharmacopeia, Extrusion, Other Extrusion Class VI Approved
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WHT-8195
Manufacturer:
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, US Pharmacopeia, Extrusion, Other Extrusion Class VI Approved
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Film Extrusion, Sheet Extrusion, Wire/Cable, Food contact, Food approval FDA 21 CFR, US Pharmacopeia, Extrusion, Other Extrusion Class VI Approved
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2295E
Manufacturer:
Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU 300
Manufacturer:
Ductile
Physical Properties
Density
0.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Ductile
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1200 T-80A
Manufacturer:
PermaStat
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MAX HPU 95 Shore A natural
Manufacturer:
Sampo
Very good tensile strength, elongation at break and tear resistance, Wide range of application temperature from -20°C to 115°C, Low gas permeability, Excellent hydrolysis and chemical resistance, Suitable for turning, milling and grinding operations with very low tool wear
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Very good tensile strength, elongation at break and tear resistance, Wide range of application temperature from -20°C to 115°C, Low gas permeability, Excellent hydrolysis and chemical resistance, Suitable for turning, milling and grinding operations with very low tool wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MAX HPU 55 Shore D natural
Manufacturer:
Sampo GmbH
Very good tensile strength, elongation at break and tear resistance, Wide range of application temperature from -20°C to 115°C, Low gas permeability, Excellent hydrolysis and chemical resistance, Suitable for turning, milling and grinding operations with very low tool wear
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Very good tensile strength, elongation at break and tear resistance, Wide range of application temperature from -20°C to 115°C, Low gas permeability, Excellent hydrolysis and chemical resistance, Suitable for turning, milling and grinding operations with very low tool wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RAVATHANE R130D55
Manufacturer:
Ravago Petro Kimya Üretim A.Ş.
Grease Resistance, Oil Resistance
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Grease Resistance, Oil Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D11H95S
Manufacturer:
Pearlthane
Copolymer
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Clear 15N85
Manufacturer:
Pearlthane
Transparent
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
11T93
Manufacturer:
Pearlthane®
Copolymer
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
12T92E
Manufacturer:
Pearlthane
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
11T85
Manufacturer:
Pearlthane
Copolymer
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
91T85
Manufacturer:
Pearlthane
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
11T98
Manufacturer:
Pearlthane
Copolymer
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU_Pearlstick™ 5707 F1
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more