HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
63210 (TPC-ET)
Manufacturer:
Sipol spa Società Italiana Polimeri
Not specified
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
35180 (TPC-ET)
Manufacturer:
Sipol spa Società Italiana Polimeri
Not specified
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
46185 (TPC-ET)
Manufacturer:
Sipol spa Società Italiana Polimeri
Not specified
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KEBAFLEX / P D 55.1 (TPC-ET)
Manufacturer:
Regional Availability Tribologic Grade Europe
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability Tribologic Grade Europe
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 40CB
Manufacturer:
Celanese
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
80R53 SP 02
Manufacturer:
Pebax® Rnew®
Flexible polyether and rigid polyamide based on renewable resources
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible polyether and rigid polyamide based on renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® Care ME40
Manufacturer:
High flexibility & elasticity, Good rebound properties, High impact resistance, Excellent dimensional stability, High chemical resistance, Easy processability & colorability, Plasticizer-free, Gamma and EtO sterilization resistant, Tough and resilient, Biocompatibility
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flexibility & elasticity, Good rebound properties, High impact resistance, Excellent dimensional stability, High chemical resistance, Easy processability & colorability, Plasticizer-free, Gamma and EtO sterilization resistant, Tough and resilient, Biocompatibility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
63R53 SP 01
Manufacturer:
Pebax® Rnew®
Flexible polyether and rigid polyamide based on renewable resources
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible polyether and rigid polyamide based on renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
72R53 SP 01
Manufacturer:
Pebax® Rnew®
Flexible polyether and rigid polyamide based on renewable resources
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible polyether and rigid polyamide based on renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SP 6716
Manufacturer:
Supreme Petrochem Ltd
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SMMA SUPREME SM 510
Manufacturer:
Supreme Petrochem Ltd
Injection Molding, Profile Extrusion, Sheet Extrusion
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Profile Extrusion, Sheet Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SM500
Manufacturer:
Injection Molding Foamable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Foamable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SG240 SMAH-GX20
Manufacturer:
XIRAN®
Injection Molding Foamable
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Foamable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SM200
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SG226 SMAH-GX13
Manufacturer:
XIRAN®
Injection Molding Foamable
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Foamable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RBB-2210-30 SI
Manufacturer:
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet Food contact, Food approval FDA 21 CFR Extrusion, Other Extrusion, Calandering
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet Food contact, Food approval FDA 21 CFR Extrusion, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RBB-2210-50 SI
Manufacturer:
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet, Food contact, Food approval FDA 21 CFR Extrusion, Other Extrusion, Calandering
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet, Food contact, Food approval FDA 21 CFR Extrusion, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RBB-2210-70 SI
Manufacturer:
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet Food contact, Food approval FDA 21 CFR Extrusion, Other Extrusion, Calandering
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet Food contact, Food approval FDA 21 CFR Extrusion, Other Extrusion, Calandering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RBB-2340-70 SI
Manufacturer:
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Electrical and Electronical Wire/Cable Extrusion
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Electrical and Electronical Wire/Cable Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XIAMETER™ RBB-2110-30 SI
Manufacturer:
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Pipe/Tube Extrusion, Profile Extrusion, Sheet
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more