HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
YP003
Manufacturer:
LNP™ LUBRICOMP™
Wear Resistant
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPE/ABS ST4600
Manufacturer:
Soft Feel
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RITEFLEX® 425
Manufacturer:
low modulus, outstanding low temperature impact, tear resistance
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low modulus, outstanding low temperature impact, tear resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® HTR8745 BK320
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® HTR8163HVBK
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® HTR237BG BK320
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HTR8441 BK316
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® HTR8223 BK320
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HTR8685 BK022A
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
6356BKB
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
21UV
Manufacturer:
Hytrel
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4068 TPC
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1001 Natural
Manufacturer:
TPC_Edgetek™ XT X XT
Not specified
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Natural
Manufacturer:
Edgetek™ XT X XT 1000
Pellets
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Ecoflex® F Blend A1200 TPC
Manufacturer:
Blown Film Extrusion, Film Extrusion Biodegradable, Compostable
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion, Film Extrusion Biodegradable, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM631-HB
Manufacturer:
Special Characteristics, Other Extrusion Heat stabilized or stable to heat
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics, Other Extrusion Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM630
Manufacturer:
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Electrical properties, Other properties
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Electrical properties, Other properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECO M700
Manufacturer:
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Electrical properties, Other properties, Characteristics, Processing Certifications, Film Extrusion, Contains renewable resources, Food contact, Delivery form, Regional Availability, Pellets, North America, Europe, Asia Pacific, Injection molding, Injection Molding Recommendations
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Electrical properties, Other properties, Characteristics, Processing Certifications, Film Extrusion, Contains renewable resources, Food contact, Delivery form, Regional Availability, Pellets, North America, Europe, Asia Pacific, Injection molding, Injection Molding Recommendations
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TR2-30GF/000
Manufacturer:
EdgeTek™
Pellets
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPE-E 40D 5287 GF20
Manufacturer:
Copolymer
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more