Recorded properties

Record date：2026-11-07

Property	Value	Unit
Density	1.23	g/cm³
Melt flow rate	77.0	g/10min
Tensile strength	120.0	MPa
Tensile modulus	6000.0	MPa
Flexural strength	190.0	MPa
Flexural modulus	190.0	MPa
Notched impact strength	5.0	kJ/m²
HDT 1.8MPa	190.0	°C
Vicat softening point	200.0	°C
Flame rating	HB / * class	—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.

Matched by original PDF filename

Storage: Review the source for packaging, storage and opened-package instructions.
Drying: Candidate injection-molding recommendations: temperature 80 °C; time >2 h; processing moisture ≤0.15 %. Verify the source, grade and conditions.
Equipment setup: Candidate injection-molding recommendations: melt temperature 260 - 290 °C; mold temperature 60 - 100 °C. Verify the source, grade and conditions.
Applications: Review the source and applicable approvals.

Source: the matched material PDF; page numbers refer to the original PDF.

Drying temperature：page 1
Drying time：page 1
Processing moisture：page 1
Melt temperature：page 1
Mold temperature：page 1