TPE
Versaflex™ HC 2110-57B
Manufacturer：艾文特公司
耐磨等级
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.01 | g/cm³ |
| Tensile strength | 3.7 | MPa |
| Tensile modulus | 2.54 | MPa |
| Elongation at break | 350.0 | % |
| Flexural modulus | 1.28 | MPa |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
The information below was automatically extracted from a material PDF and has not been individually reviewed. It is for preliminary reference only. Verify the exact grade’s manufacturer processing instructions, safety data sheet and equipment procedures before production; do not use candidate values directly as machine settings.
Matched by original PDF filename
- Storage
- Review the source for packaging, storage and opened-package instructions.
- Drying
- No drying value was confirmed by extraction; review the source.
- Equipment setup
- Candidate injection-molding recommendations: mold temperature 12.8 - 32.2 °C. Verify the source, grade and conditions.
- Applications
- Candidate application areas in the source: medical. Verify the source, exact use and applicable approvals.
Source: the matched material PDF; page numbers refer to the original PDF.
- Mold temperature：page 1
- Application areas：page 1
