热塑性聚酯弹性体
Hytrel® SC956 NC010
Manufacturer：塞拉尼斯
优异的韧性和弹性，高抗蠕变、冲击和弯曲疲劳性，低温下具有良好的柔韧性，高温下性能保持良好，耐多种工业化学品、油和溶剂，无塑化剂，良好的熔体稳定性，热稳定，阻燃，食品接触合规，吹塑和挤出等级，黑色颜料，紫外线防护添加剂，热稳定剂和阻燃剂，中等模量等级，标称硬度为55D，含有不褪色稳定剂，可由许多常规热塑性加工技术加工，专为医疗保健行业部件等应用开发，按照良好生产规范（GMP）原则制造，在美国符合适用使用条件时通常被接受用于食品接触应用，经过ISO 10993-5和-11以及USP VI类选定的部分测试，良好的熔体稳定
Recorded properties
Record date：2026-11-08
| Property | Value | Unit |
|---|---|---|
| Density | 1.19 | g/cm³ |
| Melt flow rate | 2.16 | g/10min |
| Tensile strength | 40.0 | MPa |
| Tensile modulus | 180.0 | MPa |
| Elongation at break | 300.0 | % |
| HDT 1.8MPa | 45.0 | °C |
| HDT 0.45MPa | 70.0 | °C |
| Vicat softening point | 75.0 | °C |
Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.
Grade handling information to verify
Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.
- Storage
- Confirm packaging, temperature and humidity, shelf life, and handling after opening.
- Drying
- Confirm whether drying is required, plus temperature, time, dew point and target moisture.
- Equipment setup
- Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
- Applications
- Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.
