Looking for a reliable supplier or an alternative grade? Tell us what you need

Styrene/Acrylonitrile/Copolymer

SAN A 1000/587.01

Manufacturer:ALTECH

improved stress cracking resistance,good chemical resistance,high stiffness,high surface gloss,easy release (demoulding),good flow,injection moulding grade

Recorded properties

Record date:2026-11-08

PropertyValueUnit
Density1.07g/cm³
Melt flow rate25.0g/10min
Tensile strength70.0MPa
Tensile modulus3700.0MPa
Elongation at break3.0%
Notched impact strength1.5kJ/m²
HDT 1.8MPa89.0°C
Vicat softening point103.0°C
Flame ratingHB class IEC 60695-11-10—

Test standard, specimen condition and source rights are not fully recorded. Values are for preliminary screening only; verify with the manufacturer before design or purchasing decisions.

Grade handling information to verify

Verified grade-specific storage, drying, equipment settings and application details are not available in this record. Request the latest processing guide and safety data sheet for this exact grade from the manufacturer before establishing production settings.

Storage
Confirm packaging, temperature and humidity, shelf life, and handling after opening.
Drying
Confirm whether drying is required, plus temperature, time, dew point and target moisture.
Equipment setup
Confirm barrel and mold temperatures, injection conditions, residence time, purging and safe shutdown.
Applications
Confirm the manufacturer’s intended processes, application limits and relevant approvals for this grade.